Up to 70% off on GATE courses & Test Series
Sep 22, 2020
50% off on IES Online Test Series
KPTCL AEE/AE Online Test Series - 50% off
60% off on all NEET Chemistry Courses
NEET Physics 145+ - 60% off
Total: 0
A hemispherical tank of diameter 4m is filled with water. A very small hole is punched at 1m above bottom as shown. Centre of hemispherical tank is considered as origin, find x-co-ordinate, when water strike the horizontal surface. (g = 10 m/s2)
3.4 m
2.2 m
2.8 m
1.7 m
Files must be less than 5 MB. Allowed file types: mp4, ogg, avi, mov, wmv, flv, ogv, webm
If the unit step response of a network is \((1-e^{-\alpha t})\), then its unit impulse response will be -
\(\alpha\ e^{-\alpha t}\)
\(\alpha\ e^{\frac{-t}{\alpha}}\)
\(\frac{1}{\alpha\ e^{-\alpha\ t}}\)
\((1-\alpha)\ e^{-\alpha\ t}\)
Voltage drop between the terminals a-e is v
- 18 V
- 10 V
- 5 V
- 1 V
Design rate of super elevation for horizontal highway curve of radius 450 m for a mixed traffic condition, having a speed of 125 km/h is
1.0
0.05
0.07
0.154
A 7.5 m wide rectangular channel conveys 12 m3/s of water with a velocity of 1.5 m/s. The specific energy head of the flow is
1.18 m
1.78 m
2.18 m
2.78 m
A solid shaft is to transmit 20 kilowatt at 280rpm the ultimate shear stress for the shaft material is 360 and the factor of safety is i8 the diameter of the solid shaft shall be
Is solid shaft is to transmit 20 kilowatt at 280 NM the ultimate shear stress for the shaft material is 360 and the factor of safety is it a diameter of the solid shaft shall be
A spur gear has a module of 3 mm, number of teeth 16, a face width of 36 mm and a pressure angle of 200. It is transmitting power of 1.5 and a form factor of 0.3, the stress in the gear tooth is about
32 Mpa
46 Mpa
58 Mpa
70 Mpa
Use social media login
or
Please enter the 4-digit verification code OTP can be delivered via both Email & SMS
Change mobile number?
Did not receive the code? Send OTP again
We Accept all major debit and credit cards
© 2020 AspireBuzz. All Rights Reserved.
