### Secure Your Way to the IITs.

It's Time to Upgrade your Education & Career.

**QUALIFY GATE 2020.**

Only two months to go for the exam.

Start your Preparation from the Comfort of Your Home.

### Ask yourself

Do you just want to take the exam for the sake of it or do you actually want to ace the test?

Make your last moment of preparation count. Act on the 4 Ps of cracking gate -

**Plan Prepare Practice Perform.**

Brush up your concepts with the guidance of highly experienced faculty.

# Why this course?

- Prepare with 81 extensively researched Mock tests.
- Hone your understanding of the concepts with in-depth video solutions for each question.
- Analyse your performance and benchmark against national topper to identify improvement areas.
- Take Tests simulated in the Real Gate Exam format to get familiar with the exam pattern.
- Flexible test schedules to suit your convenience and receive reminder notifications for the same.
- Additional preparation for in-person interviews by experienced trainers in the industry.
**Lastly, our impressive track record speaks for itself. Join the lineage of Past rank holders.**

# Whom this test-series is for?

**Courses offered for all the following branches:**

- CSE
- Chemical Engineering
- Mechanical Engineering
- Electrical & Electronics Engineering

- Electronics & Communication Engineering
- Instrumentation Engineering
- Civil Engineering

# Test Series:

## GATE Subject wise Preliminary Tests

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Steady and unsteady state

2. Mass and energy balances including multiphase

3. Multicomponent

4. Reacting and non reacting systems

5. Use of tie components

6. recycle bypass purge calculations

7. Gibbs phase rule and degree of freedom analysis

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. First and Second law of thermodynamics

2. Application of first law to close and open system(compressor turbine nozzles etc)

3. Second law and Entropy

4. Equation of states.

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Thermodynamics properties of pure substances

2. Residual properties

3. properties of mixture

4. partial molar properties

5. fugacity

6. excess properties and activity coefficients

7. phase equilibria

8. predicting VLE of systems

9. chemical reaction equilibrium.

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1.Inorganic chemical industries (sulfuric acid, phosphoric acid, chlor-alkali industry)

fertilizers (Ammonia, Urea, SSP and TSP)

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Natural products industries (Pulp and Paper Sugar Oil and Fats)

2. Petroleum refining and petrochemicals

3. polymerization industries (polyethylene polypropylene PVC and polyester synthetic fibers).

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Fluid statics

2. Newtonian and non-Newtonian fluids

3. Shell-balances including differential form of Bernoulli equation and energy balance

4. Macroscopic friction factors

5. Dimensional analysis and similitude

6. Flow through pipeline systems

7. Flow meters pumps and compressors

8. Elementary boundary layer theory

9. Flow past immersed bodies including packed and fluidized beds

10. Turbulent flow

11. Fluctuating velocity

12. Universal velocity profile and pressure drop.

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Particle size and shape

2. particle size distribution

3. Size reduction and classification of solid particles

4. Free and hindered settling

5. Centrifuge and cyclones

6. Thickening and classification

7. Filtration

8. Agitation and mixing

9. Conveying of solids.

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Steady and unsteady heat conduction

2. Convection and radiation

3. Thermal boundary layer and heat transfer coefficients.

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Boiling

2. Condensation and evaporation

3. Types of heat exchangers and evaporators and their process calculations

4. Design of double pipe

5. Shell and tube heat exchangers and single and multiple effect evaporators

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Fick’s laws

2. Molecular diffusion in fluids

3. Mass transfer coefficients

4. film

5. Penetration and surface renewal theories

6. Momentum

7. Heat and mass transfer analogies

8. Stage-wise and continuous contacting and stage efficiencies

9. HTU & NTU concepts humidification

10. Dehumidification

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Design and operation of equipment for distillation

2. Absorption

3. leaching

4. Liquid-liquid extraction

5. Drying

Humidification

6. Dehumidification and adsorption.

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Theories of reaction rates

2. kinetics of homogeneous reactions

3. Interpretation of kinetic data

4. Single and multiple reactions in ideal reactors

5. Residence time distribution

6. Single parameter model

7. Non-isothermal reactors

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Non-ideal reactors

2. Kinetics of heterogeneous catalytic reactions

diffusion effects in catalysis.

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Measurement of process variables

2. Sensors

3. Transducers and their dynamics

4. Process modeling and linearization

5. Transfer functions and dynamic responses of various systems

6. Systems with inverse response

7. Process reaction curve

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Controller modes (P,PI,and PID)

2. Control valves

3. Analysis of closed loop systems including stability

4. Frequency response

5. Controller tuning

6. Cascade and feed forward control.

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Optimization in process design

2. Sizing of chemical engineering equipments such as compressors,heat exchangers,multistage contactors

3. Principles of process economics and cost estimation including de-preciation and total annualized cost

4. cost indices

5. rate of return

6. payback period

7. discounted cash flow

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered****Linear Algebra**

1. Matrix Algebra

2. Systems of linear equations

3. Eigenvalues

4. Eigenvectors

**Calculus**

5. Mean value theorems

6. Theorems of integral

7. calculus

8. Evaluation of definite and improper integrals

9. Partial Derivatives

10. Maxima and minima

11. Multiple integrals

12. Fourier series

13. Vector identities

14. Directional derivatives

15. Line integral

16. Surface integral

17. Volume integral

18. Stokes’s theorem

19. Gauss’s theorem

20. Green’s theorem

**Differential equations**

21. First order equations (linear and nonlinear)

22. Higher order linear differential equations with constant coefficients

23. Method of variation of parameters

24. Cauchy’s equation

25. Euler’s equation

26. Initial and boundary value problems

27. Partial DifferentialEquations

28. Method of separation of variables.

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered****Complex variables**

1. Analytic functions

2. Cauchy’s integral theorem

3. Cauchy’s integral formula

4. Taylor series

5. Laurent series

6. Residue theorem

7. Solution integrals

**Probability and Statistics**

8. Sampling theorems

9. Conditional probability

10. Mean

11. Median

12. Mode

13. Standard Deviation

14. Random variables

15. Discrete and Continuous distributions

16. Poisson distribution

17. Normal distribution

18. Binomial distribution

19. Correlation analysis

20. Regression analysis

**Transform Theory**

21. Fourier Transform

22.Laplace Transform

23 z-Transform

**Numerical Methods**

24.Solutions of nonlinear algebraic equations

25.Single and Multi?step methods for differential equations

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. English grammar sentence completion

2. verbal analogies

3. word groups instructions

4. critical reasoning and verbal deduction

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Numerical computation

2. Numerical estimation

3. Numericalreasoning and data interpretation

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered****Process Calculations**

1. Steady and unsteady state

2. Mass and energy balances including multiphase

3. Multicomponent

4. Reacting and non reacting systems

5. Use of tie components

6. recycle bypass purge calculations

7. Gibbs phase rule and degree of freedom analysis

**Thermodynamics**

1. First and Second law of thermodynamics

2. Application of first law to close and open system(compressor turbine nozzles etc)

3. Second law and Entropy

4. Equation of states

5. Thermodynamics properties of pure substances

6. Residual properties

7. properties of mixture

8. partial molar properties

9. fugacity

10. excess properties and activity coefficients

11. phase equilibria

12. predicting VLE of systems

13. chemical reaction equilibrium.

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- 1. Fluid statics

2. Newtonian and non-Newtonian fluids

3. Shell-balances including differential form of Bernoulli equation and energy balance

4. Macroscopic friction factors

5. Dimensional analysis and similitude

6. Flow through pipeline systems

7. Flow meters

pumps and compressors

8. Elementary boundary layer theory

9. Flow past immersed bodies including packed and fluidized beds

10. Turbulent flow

11. Fluctuating velocity

12. Universal velocity profile and pressure drop.

13. Particle size and shape

14. particle size distribution

15. Size reduction and classification of solid particles

16. Free and hindered settling

17. Centrifuge and cyclones

18. Thickening and classification

19. Filtration

20. Agitation and mixing

21. Conveying of solids.

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- 1. Steady and unsteady heat conduction

2. Convection and radiation

3. Thermal boundary layer and heat transfer coefficients

4. Boiling

5. Condensation and evaporation

6. Types of heat exchangers and evaporators and their process calculations

7. Design of double pipe

8. Shell and tube heat exchangers and single and multiple effect evaporators

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- 1. Fick’s laws

2. Molecular diffusion in fluids

3. Mass transfer coefficients

4. film

5. Penetration and surface renewal theories

6. Momentum

7. Heat and mass transfer analogies

8. Stage-wise and continuous contacting and stage efficiencies

9. HTU & NTU concepts humidification

10. Dehumidification

11. Design and operation of equipment for distillation

12. Absorption

13. leaching

14. Liquid-liquid extraction

15. Drying

Humidification

16. Dehumidification and adsorption.

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- 1. Theories of reaction rates

2. kinetics of homogeneous reactions

3. Interpretation of kinetic data

4. Single and multiple reactions in ideal reactors

5. Residence time distribution

6. Single parameter model

7. Non-isothermal reactors

8. Non-ideal reactors

9. Kinetics of heterogeneous catalytic reactions

10. diffusion effects in catalysis.

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- 1. Measurement of process variables

2. Sensors

3. Transducers and their dynamics

4. Process modeling and linearization

5. Transfer functions and dynamic responses of various systems

6. Systems with inverse response

7. Process reaction curve

8. Controller modes (P,PI,and PID)

9. Control valves

10. Analysis of closed loop systems including stability

11. Frequency response

12. Controller tuning

13. Cascade and feed forward control.

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- 1. Optimization in process design

2. Sizing of chemical engineering equipments such as compressors,heat exchangers,multistage contactors

3. Principles of process economics and cost estimation including de-preciation and total annualized cost

4. cost indices

5. rate of return

6. payback period

7. discounted cash flow

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- 1. Inorganic chemical industries (sulfuric acid, phosphoric acid, chlor-alkali industry)

2. fertilizers (Ammonia, Urea, SSP and TSP)

3. Natural products industries (Pulp and Paper, Sugar, Oil, and Fats),

4. Petroleum refining and petrochemicals,

5. polymerization industries (polyethylene, polypropylene, PVC and polyester synthetic fibers).

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered****Linear Algebra**

1. Matrix Algebra

2. Systems of linear equations

3. Eigenvalues

4. Eigenvectors

**Calculus**

5. Mean value theorems

6. Theorems of integral

**calculus**

7. Evaluation of definite and improper integrals

8. Partial Derivatives

9. Maxima and minima

10. Multiple integrals

11. Fourier series

12. Vector identities

13. Directional derivatives

14. Line integral

15. Surface integral

16. Volume integral

17. Stokes’s theorem

18. Gauss’s theorem

19. Green’s theorem

**Differential equations**

20. First order equations (linear and nonlinear)

21. Higher order linear differential equations with constant coefficients

22. Method of variation of parameters

23. Cauchy’s equation

24. Euler’s equation

25. Initial and boundary value problems

26. Partial DifferentialEquations

27. Method of separation of variables

**Complex variables**

28. Analytic functions

29. Cauchy’s integral theorem

30. Cauchy’s integral formula

31. Taylor series

32. Laurent series

33. Residue theorem

34. Solution integrals

**Probability and Statistics**

35. Sampling theorems

36. Conditional probability

37. Mean

38. Median

39. Mode

40. Standard Deviation

41. Random variables

42. Discrete and Continuous distributions

43. Poisson distribution

44. Normal distribution

45. Binomial distribution

46. Correlation analysis

47. Regression analysis

**Transform Theory**

48. Solutions of nonlinear algebraic equations

49. Single and Multi?step methods for differential equations

**Numerical Methods**

50. Fourier Transform

51. Laplace Transform

52. z-Transform

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- 1. English grammar sentence completion

2. verbal analogies

3. word groups instructions

4. critical reasoning and verbal deduction

5. Numerical computation

6. Numerical estimation

7. Numericalreasoning and data interpretation

- No Of Questions : 65 Total Marks : 100 Time limit : 180 Min
**Topics Covered**- All Subjects & All Topics

- No Of Questions : 65 Total Marks : 100 Time limit : 180 Min
**Topics Covered**- All Subjects & All Topics

- No Of Questions : 65 Total Marks : 100 Time limit : 180 Min
**Topics Covered**- All Subjects & All Topics

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Steady and unsteady state

2. Mass and energy balances including multiphase

3. Multicomponent

4. Reacting and non reacting systems

5. Use of tie components

6. recycle bypass purge calculations

7. Gibbs phase rule and degree of freedom analysis

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. First and Second law of thermodynamics

2. Application of first law to close and open system(compressor turbine nozzles etc)

3. Second law and Entropy

4. Equation of states.

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Thermodynamics properties of pure substances

2. Residual properties

3. properties of mixture

4. partial molar properties

5. fugacity

6. excess properties and activity coefficients

7. phase equilibria

8. predicting VLE of systems

9. chemical reaction equilibrium.

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Fluid statics

2. Newtonian and non-Newtonian fluids

3. Shell-balances including differential form of Bernoulli equation and energy balance

4. Macroscopic friction factors

5. Dimensional analysis and similitude

6. Flow through pipeline systems

7. Flow meters

pumps and compressors

8. Elementary boundary layer theory

9. Flow past immersed bodies including packed and fluidized beds

10. Turbulent flow

11. Fluctuating velocity

12. Universal velocity profile and pressure drop.

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Particle size and shape

2. particle size distribution

3. Size reduction and classification of solid particles

4. Free and hindered settling

5. Centrifuge and cyclones

6. Thickening and classification

7. Filtration

8. Agitation and mixing

9. Conveying of solids.

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Steady and unsteady heat conduction

2. Convection and radiation

3. Thermal boundary layer and heat transfer coefficients.

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Boiling

2. Condensation and evaporation

3. Types of heat exchangers and evaporators and their process calculations

4. Design of double pipe

5. Shell and tube heat exchangers and single and multiple effect evaporators

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Fick’s laws

2. Molecular diffusion in fluids

3. Mass transfer coefficients

4. film

5. Penetration and surface renewal theories

6. Momentum

7. Heat and mass transfer analogies

8. Stage-wise and continuous contacting and stage efficiencies

9. HTU & NTU concepts humidification

10. Dehumidification

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Design and operation of equipment for distillation

2. Absorption

3. leaching

4. Liquid-liquid extraction

5. Drying

Humidification

6. Dehumidification and adsorption.

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Theories of reaction rates

2. kinetics of homogeneous reactions

3. Interpretation of kinetic data

4. Single and multiple reactions in ideal reactors

5. Residence time distribution

6. Single parameter model

7. Non-isothermal reactors

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Non-ideal reactors

2. Kinetics of heterogeneous catalytic reactions

diffusion effects in catalysis.

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Measurement of process variables

2. Sensors

3. Transducers and their dynamics

4. Process modeling and linearization

5. Transfer functions and dynamic responses of various systems

6. Systems with inverse response

7. Process reaction curve

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Controller modes (P,PI,and PID)

2. Control valves

3. Analysis of closed loop systems including stability

4. Frequency response

5. Controller tuning

6. Cascade and feed forward control.

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Optimization in process design

2. Sizing of chemical engineering equipments such as compressors,heat exchangers,multistage contactors

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1.Principles of process economics and cost estimation including de-preciation and total annualized cost

2.cost indices

3.Rate of return

4.Payback period

5.discounted cash flow

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1.Inorganic chemical industries (sulfuric acid, phosphoric acid, chlor-alkali industry) fertilizers (Ammonia, Urea, SSP and TSP)

2. Natural products industries (Pulp and Paper Sugar Oil and Fats)

3. Petroleum refining and petrochemicals

4. polymerization industries (polyethylene polypropylene PVC and polyester synthetic fibers).

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered****Linear Algebra**

1. Matrix Algebra

2. Systems of linear equations

3. Eigenvalues

4. Eigenvectors

**Calculus**

5. Mean value theorems

6. Theorems of integral

7. calculus

8. Evaluation of definite and improper integrals

9. Partial Derivatives

10. Maxima and minima

11. Multiple integrals

12. Fourier series

13. Vector identities

14. Directional derivatives

15. Line integral

16. Surface integral

17. Volume integral

18. Stokes’s theorem

19. Gauss’s theorem

20. Green’s theorem

**Differential equations**

21. First order equations (linear and nonlinear)

22. Higher order linear differential equations with constant coefficients

23. Method of variation of parameters

24. Cauchy’s equation

25. Euler’s equation

26. Initial and boundary value problems

27. Partial DifferentialEquations

28. Method of separation of variables.

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered****Complex variables**

1. Analytic functions

2. Cauchy’s integral theorem

3. Cauchy’s integral formula

4. Taylor series

5. Laurent series

6. Residue theorem

7. Solution integrals.

**Probability and Statistics**

8. Sampling theorems

9. Conditional probability

10. Mean

11. Median

12. Mode

13. Standard Deviation

14. Random variables

15. Discrete and Continuous distributions

16. Poisson distribution

17. Normal distribution

18. Binomial distribution

19. Correlation analysis

20. Regression analysis

**Transform Theory**

21. Solutions of nonlinear algebraic equations

22. Single and Multi-step methods for differential equations

**Numerical Methods**

23. Fourier Transform

24. Laplace Transform

25. z-Transform

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. English grammar sentence completion

2. verbal analogies

3. word groups instructions

4. critical reasoning and verbal deduction

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Numerical computation

2. Numerical estimation

3. Numericalreasoning and data interpretation

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- All topics are covered from the GATE Subjects
**Fluid mechanics & mechanical operation**and**Chemical Reaction Engineering**

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- All topics are covered from the GATE Subjects
**Heat Transfer**and**Mass Transfer**

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- All topics are covered from the GATE Subjects
**Process calculations & Thermodynamics**and**Plant Design Economics**

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- All topics are covered from the GATE Subjects
**Process Dynamic Control**and**Chemical Chemical Technology**

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- All topics are covered from the GATE Subjects
**Engineering Mathematics**

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- All topics are covered from the GATE Subjects
**General Aptitude**

- No Of Questions : 65 Total Marks : 100 Time limit : 180 Min
**Topics Covered**- All Subjects & All Topics

- No Of Questions : 65 Total Marks : 100 Time limit : 180 Min
**Topics Covered**- All Subjects & All Topics

- No Of Questions : 65 Total Marks : 100 Time limit : 180 Min
**Topics Covered**- All Subjects & All Topics

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- All topics are covered from the GATE Subjects
**Process calculations & Thermodynamics**and**Fluid mechanics & mechanical operation**

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- All topics are covered from the GATE Subjects
**Heat Transfer**and**Mass Transfer**

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- All topics are covered from the GATE Subjects
**Chemical Reaction Engineering**and**Chemical Technology**

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- All topics are covered from the GATE Subjects
**Process Dynamic Control**and**Plant Design Economic**

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- All topics are covered from the GATE Subjects
**Engineering Mathematics**

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- All topics are covered from the GATE Subjects
**General Aptitude**

- No Of Questions : 65 Total Marks : 100 Time limit : 180 Min
**Topics Covered**- GATE Model Test that covers all Chemical subjects

- No Of Questions : 65 Total Marks : 100 Time limit : 180 Min
**Topics Covered**- GATE Model Test that covers all Chemical subjects

- No Of Questions : 65 Total Marks : 100 Time limit : 180 Min
**Topics Covered**- GATE Model Test that covers all Chemical subjects

- No Of Questions : 65 Total Marks : 100 Time limit : 180 Min
**Topics Covered**- GATE Model Test that covers all Chemical subjects

- No Of Questions : 65 Total Marks : 100 Time limit : 180 Min
**Topics Covered**- GATE Model Test that covers all Chemical subjects

- No Of Questions : 65 Total Marks : 100 Time limit : 180 Min
**Topics Covered**- GATE Model Test that covers all Chemical subjects

# Let's see what our ex-students have to say -

**Best Test Series for GATE Chemical Engineering Question Papers**

**Best Test Series for GATE Chemical Engineering Question Papers**GATE is certainly well desired and the GATE score is an important determining factor in a competitive assessment like this. Being aware that time is limited and the aptitude to apply the right concepts with analytical clarity in given time frame definitely acts as the core competencey. * GATE Chemical Engineering test series* having

*is a set of intensely researched and painstakingly curated extensive*

**GATE Chemical Engineering paper 2020***with over 100000 vast repository of questions across 7 Engineering streams including flat out GATE Chemical Engineering Entrance Exam Free Online Test too.*

**GATE coach Chemical Engineering test series***tremendous scope to crack GATE for Chemical Engineering(CHEM) finds global application in everyday life. The industry offers multiple roles for skilled professionals and Chemical Engineers play a significant role in making basic chemical manufacturing to designing and scientific research and development services, be it health-care industries, food and manufacturing units or electronics and energy manufacturers. The industries which provide or offer employment to Chemical Engineers has a broad scope such as Nuclear Energy, Agriculture, Consumer Products, Oil refineries, FMCG manufacturing, Biotechnology and pharmaceutical companies, Software industry etc.*

**GATE 2020 Online test series for Chemical Engineering provides**The AspireBuzz * GATE Chemical Engineering coaching* comprises of 80+ Tests with Video Solutions, 43 Chapter & Topic wise Tests, 25 Subject & Multi Subject wise Tests and 12 Full Mock Tests adopting uniquely stimulating 3Vs Concept-Hint-Solution aspect to crack GATE efficiently. With an interface exactly resembling the real GATE known as GATE Simulator, the reports generated by the

*offers an intensive scrutiny and 360 degree perspective of your scores comprising of strengths, weaknesses as well as your ranking in comparison to other top aspirants. Our*

**GATE Chemical Engineering paper analysis***is by far the best cutting edge test methodology available which enables the students with an interactive approach, where every question is accompanied by 3 interactive videos. These stimulating videos help a prospective engineer to understand the concept by being tested and reaching out at a solution in a logical and systematic manner to boost GATE rank effectively, which far better approach than just reading*

**GATE Chemical Engineering paper***.*

**GATE Chemical Engineering books**# About Tutor

VANI Institute was established in the year 1991 at Hyderabad spreading its wings to all branches of engineering and to the cities of Bangalore, Pune, Chennai, Kochi, Kolkata and Bhubaneswar.

VANI Institute initially started coaching for AMIE gaining a good reputation it then started coaching for GATE, establishing itself as the best coaching institute for GATE, ESE and PSUs in the country.

#### First GATE Institute in India

VANI Institute is the first Institute in India to start GATE coaching. The Institute started coaching for GATE in all branches. Over the years time and again the students across the country have endorsed for VANI as the best coaching Institute for GATE, ESE and PSUs.

VANI Institute aims to provide the top class and quality training to the students by providing with all the facilities and study material which can lead them as toppers in GATE, ESE and PSU exams. It is also well known for effective teaching and personality development skills.

#### Award Winner of Best Coaching Institute for GATE ESE and PSUs

Quality always pays off. VANI Institute has proven this emphatically. IndiaEducation.com run by Blindwink Solutions Private Limited have awarded VANI Institute with Best Coaching Institute GATE,ESE & PSUs. Apart from this award VANI Institute has won 7 other awards in the past

## Recomoded Tests Related to this Course

*5449.00*