loader
 

GATE Online Test Series for Mechanical - Video Solutions - 2021

Extensive online test series of above 100000 questions with interactive videos. Test Package By Vani Institute
3.8
Students Enrolled: 586 Total Tests: 80
Refer & Earn

Secure Your Way to the IITs.

It's Time to Upgrade your Education & Career.

QUALIFY GATE 2020.
Only two months to go for the exam.
Start your Preparation from the Comfort of Your Home.

ENROLL FOR ONLINE GATE SERIES

Ask yourself

Do you just want to take the exam for the sake of it or do you actually want to ace the test?

Make your last moment of preparation count. Act on the 4 Ps of cracking gate -

Plan Prepare Practice Perform.

Brush up your concepts with the guidance of highly experienced faculty.

Why this course?

  • Prepare with 81 extensively researched Mock tests.
  • Hone your understanding of the concepts with in-depth video solutions for each question.
  • Analyse your performance and benchmark against national topper to identify improvement areas.
  • Take Tests simulated in the Real Gate Exam format to get familiar with the exam pattern.
  • Flexible test schedules to suit your convenience and receive reminder notifications for the same.
  • Additional preparation for in-person interviews by experienced trainers in the industry.
  • Lastly, our impressive track record speaks for itself. Join the lineage of Past rank holders.

Whom this test-series is for?

Courses offered for all the following branches:

  • CSE
  • Chemical Engineering
  • Mechanical Engineering
  • Electrical & Electronics Engineering
  • Electronics & Communication Engineering
  • Instrumentation Engineering
  • Civil Engineering

Test Papers

Total: 80 Tests

  • Engineering Mechanics Test-1 Available Now

  • No Of Questions : 15 Total Marks : 25 Time limit : 45 Min

  • Topics Covered:

    1. Free body diagrams and equilibrium
    2. Trusses and frames
    3. virtual work
    4. kinematics and dynamics of particles and of rigid bodies in plane motion
    5. impulse and momentum (linear and angular) and energy formulations
    6. collisions.

  • Strength of materials Test-1 Available Now

  • No Of Questions : 15 Total Marks : 25 Time limit : 45 Min

  • Topics Covered:

    1. Simple stresses
    2. Thermal stresses
    3. Complex stresses and strains
    4. SFD & BMD
    5. Deflections & slopes
    6. strain gauges & rosettes
    7. testing of hardness and impact strength

  • Fluid Mechanics Test-1 Available Now

  • No Of Questions : 15 Total Marks : 25 Time limit : 45 Min

  • Topics Covered:

    1. Properties of Fluids
    2. fluid statistics (Manometry,buoyancy, forces on submerged bodies)
    3. fluid kinematics (control volume analysis of mass & fluid acceleration)
    4. fluid dynamics (control volume analysis of momentum & energy , differential equations of continuity and momentum, Bernoulli’s equation)

  • Thermodynamics Test-1 Available Now

  • No Of Questions : 15 Total Marks : 25 Time limit : 45 Min

  • Topics Covered:

    1. Basic concepts
    2 Zeroth law
    3. Work & heat
    4. First law of thermodynamics
    5. Second law of thermodynamics and Entropy Availability
    6. properties of pure substances
    7. vapour and gas power cycles

  • Machine Design Test-1 Available Now

  • No Of Questions : 15 Total Marks : 25 Time limit : 45 Min

  • Topics Covered:

    1. Design for static loading failure theories & variable loading riveted
    2. bolted & welded joints

  • Heat Transfer Test-1 Available Now

  • No Of Questions : 15 Total Marks : 25 Time limit : 45 Min

  • Topics Covered:

    1. Conduction
    2. Fins & convection

  • Theory of Machines and Vibrations Test-1 Available Now

  • No Of Questions : 15 Total Marks : 25 Time limit : 45 Min

  • Topics Covered:

    1. Analysis of planar mechanisms
    2. Dynamic analysis of slider – crank mechanism
    3. fly wheels
    4. vibrations

  • Production Test-1 Available Now

  • No Of Questions : 15 Total Marks : 25 Time limit : 45 Min

  • Topics Covered:

    1. Metal casting
    2. welding metal forming & sheet
    3. metal operations
    4. Metal cutting, machining

  • IM Available Now

  • No Of Questions : 15 Total Marks : 25 Time limit : 45 Min

  • Topics Covered:

    1. Inventory control
    2. production planning
    3. Control scheduling & sequencing
    4. Line balancing
    5. Forecasting materials requirement planning

  • Engineering Mathematics Test-1 Available Now

  • No Of Questions : 15 Total Marks : 25 Time limit : 45 Min

  • Topics Covered:

    Linear Algebra
    1. Matrix Algebra
    2. Systems of linear equations
    3. Eigenvalues
    4. Eigenvectors
    Calculus
    5. Mean value theorems
    6. Theorems of integral
    7. calculus
    8. Evaluation of definite and improper integrals
    9. Partial Derivatives
    10. Maxima and minima
    11. Multiple integrals
    12. Fourier series
    13. Vector identities
    14. Directional derivatives
    15. Line integral
    16. Surface integral
    17. Volume integral
    18. Stokes’s theorem
    19. Gauss’s theorem
    20. Green’s theorem
    Differential equations
    21. First order equations (linear and nonlinear)
    22. Higher order linear differential equations with constant coefficients
    23. Method of variation of parameters
    24. Cauchy’s equation
    25. Euler’s equation
    26. Initial and boundary value problems
    27. Partial DifferentialEquations
    28. Method of separation of variables.

  • Strength of materials Test-2 Available Now

  • No Of Questions : 15 Total Marks : 25 Time limit : 45 Min

  • Topics Covered:

    1. Theory of simple bending
    2. Centroids
    3. moment of Inertia
    4. Shear stress distribution in beams &Torsion
    5. Thin cylinder & strain energy
    6. Columns & struts

  • Fluid Mechanics Test-2 Available Now

  • No Of Questions : 15 Total Marks : 25 Time limit : 45 Min

  • Topics Covered:

    1. Laminar flow
    2. Turbulent flow & Boundary layer flow through pipes
    3. head losses in pipes,bends etc
    4. Hydraulic machines (Turbo-machinery, peltonwheel,francis and kaplan turbines impulse and reaction principles, velocity diagrams)
    5. dimensional analysis

  • Thermodynamics Test-2 Available Now

  • No Of Questions : 15 Total Marks : 25 Time limit : 45 Min

  • Topics Covered:

    1. Air and ags compressors
    2. I.C engines
    3. Air standard Otto diesel and dual cycles
    4. Refrigeration and air-conditioning
    5. Vapour and gas refrigeration
    6. Concepts of refrigeration and reheat and heat pump cycles
    7. properties of moist air
    8. Psychometric chart
    9. Basic psychometric processes

  • Machine Design Test-2 Available Now

  • No Of Questions : 15 Total Marks : 25 Time limit : 45 Min

  • Topics Covered:

    1. Shafts
    2. sliding and rolling contact bearings
    3. clutches and brakes
    4. gears & springs

  • Heat Transfer Test-2 Available Now

  • No Of Questions : 15 Total Marks : 25 Time limit : 45 Min

  • Topics Covered:

    1. Unsteady heat conduction
    2. radiation & heat exchangers

  • Theory of Machines and Vibrations Test-2 Available Now

  • No Of Questions : 15 Total Marks : 25 Time limit : 45 Min

  • Topics Covered:

    1. Gears & gear trains
    2. cams
    3. governors
    4. balancing of reciprocating and rotating masses
    5. Gyroscope

  • Production Test-2 Available Now

  • No Of Questions : 15 Total Marks : 25 Time limit : 45 Min

  • Topics Covered:

    1. Metrology and inspection CNC M/C
    2. NTM CIM & engineering materials
    3. Jigs & Fixtures

  • IM Available Now

  • No Of Questions : 15 Total Marks : 25 Time limit : 45 Min

  • Topics Covered:

    1. PERT & CPM
    2. Linear programming
    3. Simplex transportation & assignment
    4. Simple queuing models
    5. Network flow models

  • EngineeringMathematics Test-2 Available Now

  • No Of Questions : 15 Total Marks : 25 Time limit : 45 Min

  • Topics Covered:

    Complex variables
    1. Analytic functions
    2. Cauchy’s integral theorem
    3. Cauchy’s integral formula
    4. Taylor series
    5. Laurent series
    6. Residue theorem
    7. Solution integrals
    Probability and Statistics
    8. Sampling theorems
    9. Conditional probability
    10. Mean
    11. Median
    12. Mode
    13. Standard Deviation
    14. Random variables
    15. Discrete and Continuous distributions
    16. Poisson distribution
    17. Normal distribution
    18. Binomial distribution
    19. Correlation analysis
    20. Regression analysis
    Transform Theory
    21. Fourier Transform
    22. Laplace Transform
    23. z-Transform
    Numerical Methods
    24. Solutions of nonlinear algebraic equations
    25. Single and Multi?step methods for differential equations

  • General Aptitude Test-1 Available Now

  • No Of Questions : 15 Total Marks : 25 Time limit : 45 Min

  • Topics Covered:

    1. English grammar sentence completion
    2. verbal analogies
    3. word groups instructions
    4. critical reasoning and verbal deduction

  • General Aptitude Test-2 Available Now

  • No Of Questions : 15 Total Marks : 25 Time limit : 45 Min

  • Topics Covered:

    1. Numerical computation
    2. Numerical estimation
    3. Numericalreasoning and data interpretation

  • Engineering Mechanics Available Now

  • No Of Questions : 30 Total Marks : 50 Time limit : 90 Min

  • Topics Covered:

    1. Free body diagrams and equilibrium
    2. Trusses and frames
    3. virtual work
    4. kinematics and dynamics of particles and of rigid bodies in plane motion
    5. impulse and momentum (linear and angular) and energy formulations
    6. Collisions

  • Strength of materials Available Now

  • No Of Questions : 30 Total Marks : 50 Time limit : 90 Min

  • Topics Covered:

    1.Simple stresses
    2. Thermal stresses
    3. Complex stresses and strains
    4. SFD & BMD
    5. Deflections &slopes
    6. strain gauges & rosettes
    7. testing of hardness and impact strength
    8. Theory of simple bending
    9. Centroids
    10. moment of Inertia
    11. Shear stress distribution in beams & Torsion
    12. Thin cylinder & strain energy
    13. Columns & struts

  • Thermodynamics Available Now

  • No Of Questions : 30 Total Marks : 50 Time limit : 90 Min

  • Topics Covered:

    1. Basic concepts
    2 Zeroth law
    3. Work & heat
    4. First law of thermodynamics
    5. Second law of thermodynamics and Entropy Availability
    6. properties of pure substances
    7. vapour and gas power cycles
    8. Air and ags compressors
    9. I.C engines
    10. Air standard Otto diesel and dual cycles
    11. Refrigeration and air-conditioning
    12. Vapour and gas refrigeration
    13. Concepts of refrigeration and reheat and heat pump cycles
    14. properties of moist air
    15. Psychometric chart
    16. Basic psychometric processes

  • Fluid Mechanics Available Now

  • No Of Questions : 30 Total Marks : 50 Time limit : 90 Min

  • Topics Covered:

    1.Properties of Fluids
    2. fluid statistics (Manometry,buoyancy, forces on submerged bodies)
    3. fluid kinematics (control volume analysis of mass & fluid acceleration)
    4. fluid dynamics (control volume analysis of momentum & energy ,differential equations of continuity and momentum, Bernoulli’s equation)
    5. Laminar flow
    6. Turbulent flow & Boundary layer flow through pipes
    7. head losses in pipes,bends etc
    8. Hydraulic machines (Turbo-machinery, peltonwheel,francis and kaplan turbines impulse and reaction principles, velocity diagrams)
    9. dimensional analysis

  • Heat Transfer Available Now

  • No Of Questions : 30 Total Marks : 50 Time limit : 90 Min

  • Topics Covered:

    1. Conduction
    2. Fins & convection
    3. Unsteady heat conduction
    4. radiation & heat exchangers

  • Theory of Machines Available Now

  • No Of Questions : 30 Total Marks : 50 Time limit : 90 Min

  • Topics Covered:

    1. Analysis of planar mechanisms
    2. Dynamic analysis of slider – crank mechanism
    3. fly wheels
    4. vibrations
    5. Gears & gear trains
    6. cams governors
    7. balancing of reciprocating and rotating masse
    8. Gyroscope

  • Machine Design Available Now

  • No Of Questions : 30 Total Marks : 50 Time limit : 90 Min

  • Topics Covered:

    1. Design for static loading
    2. failure theories
    3. variable loading
    4. riveted, bolted & welded joints
    5. Shafts
    6. sliding and rolling contact bearings
    7. clutches and brakes
    8. gears & springs

  • Production Available Now

  • No Of Questions : 30 Total Marks : 50 Time limit : 90 Min

  • Topics Covered:

    1. Metal casting
    2. welding metal forming & sheet
    3. Metal operations
    4. Metal cutting
    5. machining
    6. Metrology and inspection CNC M/C, NTM, CIM & engineering materials
    7. Jjigs & Fixtures

  • IM Available Now

  • No Of Questions : 30 Total Marks : 50 Time limit : 90 Min

  • Topics Covered:

    1.Inventory control
    2. production planning
    3. Control scheduling & sequencing
    4. Line balancing
    5. Forecasting materials requirement planning
    6. PERT & CPM
    7. Linear programming
    8. Simplex transportation & assignment
    9. Simple queuing models
    10. Network flow models

  • EngineeringMathematics Available Now

  • No Of Questions : 30 Total Marks : 50 Time limit : 90 Min

  • Topics Covered:

    Linear Algebra
    1. Matrix Algebra
    2. Systems of linear equations
    3. Eigenvalues
    4. Eigenvectors
    Calculus
    5. Mean value theorems
    6. Theorems of integral
    calculus
    7. Evaluation of definite and improper integrals
    8. Partial Derivatives
    9. Maxima and minima
    10. Multiple integrals
    11. Fourier series
    12. Vector identities
    13. Directional derivatives
    14. Line integral
    15. Surface integral
    16. Volume integral
    17. Stokes’s theorem
    18. Gauss’s theorem
    19. Green’s theorem
    Differential equations
    20. First order equations (linear and nonlinear)
    21. Higher order linear differential equations with constant coefficients
    22. Method of variation of parameters
    23. Cauchy’s equation
    24. Euler’s equation
    25. Initial and boundary value problems
    26. Partial DifferentialEquations
    27. Method of separation of variables
    Complex variables
    28. Analytic functions
    29. Cauchy’s integral theorem
    30. Cauchy’s integral formula
    31. Taylor series
    32. Laurent series
    33. Residue theorem
    34. Solution integrals
    Probability and Statistics
    35. Sampling theorems
    36. Conditional probability
    37. Mean
    38. Median
    39. Mode
    40. Standard Deviation
    41. Random variables
    42. Discrete and Continuous distributions
    43. Poisson distribution
    44. Normal distribution
    45. Binomial distribution
    46. Correlation analysis
    47. Regression analysis
    Transform Theory
    48. Solutions of nonlinear algebraic equations
    49. Single and Multi-step methods for differential equations
    Numerical Methods
    50. Fourier Transform
    51. Laplace Transform
    52. z-Transform

  • General Aptitude Available Now

  • No Of Questions : 30 Total Marks : 50 Time limit : 90 Min

  • Topics Covered:

    1. English grammar sentence completion
    2. verbal analogies
    3. word groups instructions
    4. critical reasoning and verbal deduction

  • General Aptitude Available Now

  • No Of Questions : 30 Total Marks : 50 Time limit : 90 Min

  • Topics Covered:

    1. Numerical computation
    2. Numerical estimation
    3. Numericalreasoning and data interpretation

  • GATE Mock Test 1 Available Now

  • No Of Questions : 65 Total Marks : 100 Time limit : 180 Min

  • Topics Covered:

    All Subjects & All Topics

  • GATE Mock Test 2 Available Now

  • No Of Questions : 65 Total Marks : 100 Time limit : 180 Min

  • Topics Covered:

    All Subjects & All Topics

  • GATE Mock Test 3 Available Now

  • No Of Questions : 65 Total Marks : 100 Time limit : 180 Min

  • Topics Covered:

    All Subjects & All Topics

  • Engineering Mechanics Test-1 Available Now

  • No Of Questions : 15 Total Marks : 25 Time limit : 45 Min

  • Topics Covered:

    1. Free body diagrams and equilibrium
    2. Trusses and frames
    3. virtual work
    4. kinematics and dynamics of particles and of rigid bodies in plane motion
    5. impulse and momentum (linear and angular) and energy formulations
    6. collisions.

  • Strength of materials Test-1 Available Now

  • No Of Questions : 15 Total Marks : 25 Time limit : 45 Min

  • Topics Covered:

    1. Simple stresses
    2. Thermal stresses
    3. Complex stresses and strains
    4. SFD &BMD
    5. Deflections &slopes
    6. strain gauges & rosettes
    7. testing of hardness and impact strength

  • Strength of materials Test-2 Available Now

  • No Of Questions : 15 Total Marks : 25 Time limit : 45 Min

  • Topics Covered:

    1. Theory of simple bending
    2. Centroids
    3. moment of Inertia
    4. Shear stress distribution in beams &Torsion
    5. Thin cylinder & strain energy
    6. Columns & struts

  • Fluid Mechanics Test-1 Available Now

  • No Of Questions : 15 Total Marks : 25 Time limit : 45 Min

  • Topics Covered:

    1. Properties of Fluids
    2. fluid statistics (Manometry,buoyancy, forces on submerged bodies)
    3. fluid kinematics (control volume analysis of mass & fluid acceleration)
    4. fluid dynamics (control volume analysis of momentum & energy ,differential equations of continuity and momentum, Bernoulli’s equation)

  • Fluid Mechanics Test-2 Available Now

  • No Of Questions : 15 Total Marks : 25 Time limit : 45 Min

  • Topics Covered:

    1. Laminar flow
    2. Turbulent flow & Boundary layer flow through pipes
    3. head losses in pipes,bends etc
    4. Hydraulic machines (Turbo-machinery, peltonwheel,francis and kaplan turbines impulse and reaction principles, velocity diagrams)
    5. dimensional analysis

  • Thermodynamics Test-1 Available Now

  • No Of Questions : 15 Total Marks : 25 Time limit : 45 Min

  • Topics Covered:

    1. Basic concepts
    2 Zeroth law
    3. Work & heat
    4. First law of thermodynamics
    5. Second law of thermodynamics and Entropy Availability
    6. properties of pure substances
    7. vapour and gas power cycles

  • Thermodynamics Test-2 Available Now

  • No Of Questions : 15 Total Marks : 25 Time limit : 45 Min

  • Topics Covered:

    1. Air and ags compressors
    2. I.C engines
    3. Air standard Otto diesel and dual cycles
    4. Refrigeration and air-conditioning
    5. Vapour and gas refrigeration
    6. Concepts of refrigeration and reheat and heat pump cycles
    7. properties of moist air
    8. Psychometric chart
    9. Basic psychometric processes

  • Machine Design Test-1 Available Now

  • No Of Questions : 15 Total Marks : 25 Time limit : 45 Min

  • Topics Covered:

    1. Design for static loading failure theories & variable loading riveted
    2. bolted & welded joints

  • Machine Design Test-2 Available Now

  • No Of Questions : 15 Total Marks : 25 Time limit : 45 Min

  • Topics Covered:

    1. Shafts
    2. sliding and rolling contact bearings
    3. clutches and brakes
    4. gears & springs

  • Heat Transfer Test-1 Available Now

  • No Of Questions : 15 Total Marks : 25 Time limit : 45 Min

  • Topics Covered:

    1. Conduction
    2. Fins & convection

  • Heat Transfer Test-2 Available Now

  • No Of Questions : 15 Total Marks : 25 Time limit : 45 Min

  • Topics Covered:

    1. Unsteady heat conduction
    2. radiation & heat exchangers

  • Theory of Machines and Vibrations Test-1 Available Now

  • No Of Questions : 15 Total Marks : 25 Time limit : 45 Min

  • Topics Covered:

    1. Analysis of planar mechanisms
    2. Dynamic analysis of slider – crank mechanism
    3. fly wheels
    4. vibrations

  • Theory of Machines and Vibrations Test-2 Available Now

  • No Of Questions : 15 Total Marks : 25 Time limit : 45 Min

  • Topics Covered:

    1. Gears & gear trains
    2. cams
    3. governors
    4. balancing of reciprocating and rotating masses
    5. Gyroscope

  • Production Test-1 Available Now

  • No Of Questions : 15 Total Marks : 25 Time limit : 45 Min

  • Topics Covered:

    1. Metal casting
    2. welding metal forming & sheet
    3. metal operations
    4. Metal cutting, machining

  • Production Test-2 Available Now

  • No Of Questions : 15 Total Marks : 25 Time limit : 45 Min

  • Topics Covered:

    1. Metrology and inspection CNC M/C
    2. NTM CIM & engineering materials
    3. Jigs & Fixtures

  • IM and OR On 22nd Oct

  • No Of Questions : 15 Total Marks : 25 Time limit : 45 Min

  • Topics Covered:

    1. Inventory control
    2. production planning
    3. Control scheduling & sequencing
    4. Line balancing
    5. Forecasting materials requirement planning

  • IM and OR On 26th Oct

  • No Of Questions : 15 Total Marks : 25 Time limit : 45 Min

  • Topics Covered:

    1. PERT & CPM
    2. Linear programming
    3. Simplex transportation & assignment
    4. Simple queuing models
    5. Network flow models

  • Engineering Mathematics Test-1 On 30th Oct

  • No Of Questions : 15 Total Marks : 25 Time limit : 45 Min

  • Topics Covered:

    Linear Algebra
    1. Matrix Algebra
    2. Systems of linear equations
    3. Eigenvalues
    4. Eigenvectors
    Calculus
    5. Mean value theorems
    6. Theorems of integral
    7. calculus
    8. Evaluation of definite and improper integrals
    9. Partial Derivatives
    10. Maxima and minima
    11. Multiple integrals
    12. Fourier series
    13. Vector identities
    14. Directional derivatives
    15. Line integral
    16. Surface integral
    17. Volume integral
    18. Stokes’s theorem
    19. Gauss’s theorem
    20. Green’s theorem
    Differential equations
    21. First order equations (linear and nonlinear)
    22. Higher order linear differential equations with constant coefficients
    23. Method of variation of parameters
    24. Cauchy’s equation
    25. Euler’s equation
    26. Initial and boundary value problems
    27. Partial DifferentialEquations
    28. Method of separation of variables.

  • EngineeringMathematics Test-2 On 2nd Nov

  • No Of Questions : 15 Total Marks : 25 Time limit : 45 Min

  • Topics Covered:

    Complex variables
    1. Analytic functions
    2. Cauchy’s integral theorem
    3. Cauchy’s integral formula
    4. Taylor series
    5. Laurent series
    6. Residue theorem
    7. Solution integrals
    Probability and Statistics
    8. Sampling theorems
    9. Conditional probability
    10. Mean
    11. Median
    12. Mode
    13. Standard Deviation
    14. Random variables
    15. Discrete and Continuous distributions
    16. Poisson distribution
    17. Normal distribution
    18. Binomial distribution
    19. Correlation analysis
    20. Regression analysis
    Transform Theory
    21. Fourier Transform
    22. Laplace Transform
    23 z-Transform
    Numerical Methods
    24.Solutions of nonlinear algebraic equations
    25.Single and Multi?step methods for differential equations

  • General Aptitude Test-1 On 5th Nov

  • No Of Questions : 15 Total Marks : 25 Time limit : 45 Min

  • Topics Covered:

    1. English grammar sentence completion
    2. verbal analogies
    3. word groups instructions
    4. critical reasoning and verbal deduction

  • General Aptitude Test-2 On 8th Nov

  • No Of Questions : 15 Total Marks : 25 Time limit : 45 Min

  • Topics Covered:

    1. Numerical computation
    2. Numerical estimation
    3. Numericalreasoning and data interpretation

  • Engineering Mechanics On 11th Nov

  • No Of Questions : 30 Total Marks : 50 Time limit : 90 Min

  • Topics Covered:

    All topics are covered from the GATE Subjects Engineering Mechanics and Strength of materials

  • Production Engineering On 14th Nov

  • No Of Questions : 30 Total Marks : 50 Time limit : 90 Min

  • Topics Covered:

    All topics are covered from the GATE Subjects Production Engineering and Im and OR

  • Thermo Dynamics On 17th Nov

  • No Of Questions : 30 Total Marks : 50 Time limit : 90 Min

  • Topics Covered:

    All topics are covered from the GATE Subjects Thermo Dynamics

  • Machine Design & Theory of Machines and Vibrations Available Now

  • No Of Questions : 30 Total Marks : 50 Time limit : 90 Min

  • Topics Covered:

    All topics are covered from the GATE Subjects Machine Design and Theory of Machines and Vibrations

  • Heat Transfer On 23rd Nov

  • No Of Questions : 30 Total Marks : 50 Time limit : 90 Min

  • Topics Covered:

    All topics are covered from the GATE Subjects Heat Transfer and Fluid Mechanics

  • General Aptitude On 26th Nov

  • No Of Questions : 30 Total Marks : 50 Time limit : 90 Min

  • Topics Covered:

    All topics are covered from the GATE Subjects General Aptitude

  • EngineeringMathematics On 29th Nov

  • No Of Questions : 30 Total Marks : 50 Time limit : 90 Min

  • Topics Covered:

    All topics are covered from the GATE Subjects Engineering Mathematics

  • GATE Mock Test 1 On 2nd Nov

  • No Of Questions : 65 Total Marks : 100 Time limit : 180 Min

  • Topics Covered:

    All Subjects & All Topics

  • GATE Mock Test 2 On 5th Nov

  • No Of Questions : 65 Total Marks : 100 Time limit : 180 Min

  • Topics Covered:

    All Subjects & All Topics

  • GATE Mock Test 3 On 8th Dec

  • No Of Questions : 65 Total Marks : 100 Time limit : 180 Min

  • Topics Covered:

    All Subjects & All Topics

  • Heat Transfer On 11th Dec

  • No Of Questions : 30 Total Marks : 50 Time limit : 90 Min

  • Topics Covered:

    All topics are covered from the GATE Subjects Heat Transfer and Fluid Mechanics

  • Machine Design On 14th Dec

  • No Of Questions : 30 Total Marks : 50 Time limit : 90 Min

  • Topics Covered:

    All topics are covered from the GATE Subjects Machine Design and Theory of Machines and Vibrations

  • Production Engineering and Im and OR On 17th Dec

  • No Of Questions : 30 Total Marks : 50 Time limit : 90 Min

  • Topics Covered:

    All topics are covered from the GATE Subjects Production Engineering and Im and OR

  • Engineering Mechanics and Strength of materials On 20th Dec

  • No Of Questions : 30 Total Marks : 50 Time limit : 90 Min

  • Topics Covered:

    All topics are covered from the GATE Subjects Engineering Mechanics and Strength of materials

  • Thermo Dynamics On 23rd Dec

  • No Of Questions : 30 Total Marks : 50 Time limit : 90 Min

  • Topics Covered:

    All topics are covered from the GATE Subjects Thermo Dynamics

  • EngineeringMathematics On 26th Dec

  • No Of Questions : 30 Total Marks : 50 Time limit : 90 Min

  • Topics Covered:

    All topics are covered from the GATE Subjects Engineering Mathematics

  • General Aptitude On 29th Dec

  • No Of Questions : 30 Total Marks : 50 Time limit : 90 Min

  • Topics Covered:

    All topics are covered from the GATE Subjects General Aptitude

  • GATE Mechical Mock Test 1 On 1st Jan

  • No Of Questions : 65 Total Marks : 100 Time limit : 180 Min

  • Topics Covered:

    GATE Model Test that covers all Mechanical subjects

  • GATE Mechical Mock Test 2 On 4th Jan

  • No Of Questions : 65 Total Marks : 100 Time limit : 180 Min

  • Topics Covered:

    GATE Model Test that covers all Mechanical subjects

  • GATE Mechical Mock Test 3 On 7th Jan

  • No Of Questions : 65 Total Marks : 100 Time limit : 180 Min

  • Topics Covered:

    GATE Model Test that covers all Mechanical subjects

  • GATE Mechical Mock Test 4 On 10th Jan

  • No Of Questions : 65 Total Marks : 100 Time limit : 180 Min

  • Topics Covered:

    GATE Model Test that covers all Mechanical subjects

  • GATE Mechical Mock Test 5 On 13th Jan

  • No Of Questions : 65 Total Marks : 100 Time limit : 180 Min

  • Topics Covered:

    GATE Model Test that covers all Mechanical subjects

  • GATE Mechical Mock Test 6 On 16th Jan

  • No Of Questions : 65 Total Marks : 100 Time limit : 180 Min

  • Topics Covered:

    GATE Model Test that covers all Mechanical subjects

Description

What is the best test series for GATE Mechanical?

GATE is well demanded certainly and the GATE score is a critically deciding factor in a competitive scenario like this. Being aware that time is limited and the skill to know the right concepts with analytical clarity in given time frame surely acts as the core competence for an aspirant. GATE 2021 Online Test Series : Mechanical Engineering based on GATE exam pattern for Mechanical Engineering is a set of thoroughly researched and meticulously curated extensive online best test series for GATE Mechanical with over vast repository of 100000 questions across main Engineering streams including Free online Mechanical Engineering objectiv test too. The onset of automation in the picture, the demand for Mechanical Engineers for private as well as public sector job opportunities is at rise to increasingly supervise, design, monitor and analyze these systems. Significant sectors like railways, national highways, heavy-engineering industries, ports, defense etc are some of the leading employers for Mechanical Engineers.

The test series avidly following GATE exam pattern for Mechanical Engineering 2021 comprises of 80+ Tests with Video Solutions, 43 Chapter & Topic wise Tests, 25 Subject & Multi Subject wise Tests and 12 Full Mock Tests adopting uniquely stimulating 3Vs Concept-Hint-Solution aspect to crack GATE efficiently. With an interface exactly resembling the real GATE known as GATE Simulator, the reports generated by the GATE Online Test Series Mechanical Engineering 2021 provides a comprehensive analysis and 360 degree perspective of your scores comprising of strengths, weaknesses as well as your ranking in comparison to other top aspirants. The GATE 2021 online test series for ME on GATE MECHANICAL ENGINEERING Exam Pattern and Details is by far the leading, first-rate course available which is created on the basis of need for a concise, applicable and time-efficient module in an stimulating manner for the students to ace GATE as top ranker.

About Tutor

  • Tutor: Vani Institute
  • Tests Packages: 92
  • Students: 13047
4.4

Vani institute (VIET) is the first institute in south India to start coaching for GATE. the main strength of the organization is its faculty and quality education and very high standard Mock tests.

Established in the year 1991 in Hyderabad we have been spreading our wings to all branches of engineering and to the city's of Bangalore, Pune, Chennai, Kochi, Kolkata and Bhubaneswar

Vani has some of the best faculty in the country who work numerous hours to create mock tests and material while they also teach in the institute. A rigorous process is involved for creating quality mock tests involving several faculty members

We aim to provide the top quality mock tests to the students to become toppers in GATE, ESE and PSU exams. The mock tests available here are the same ones we give to the students of our institute

Reviews & Rating

3.8

(5030)

Course Rating

  • 5 stars
    33 %
  • 4 stars
    35 %
  • 3 stars
    17 %
  • 2 stars
    7 %
  • 1 stars
    8 %
  • D

    was good

  • V

    Very intutive

  • P

    rating six

  • S

    Questions were good

  • D

    Not prepared well but questions were answerable