### Secure Your Way to the IITs.

It's Time to Upgrade your Education & Career.

**QUALIFY GATE 2020.**

Only two months to go for the exam.

Start your Preparation from the Comfort of Your Home.

### Ask yourself

Do you just want to take the exam for the sake of it or do you actually want to ace the test?

Make your last moment of preparation count. Act on the 4 Ps of cracking gate -

**Plan Prepare Practice Perform.**

Brush up your concepts with the guidance of highly experienced faculty.

# Why this course?

- Prepare with 81 extensively researched Mock tests.
- Hone your understanding of the concepts with in-depth video solutions for each question.
- Analyse your performance and benchmark against national topper to identify improvement areas.
- Take Tests simulated in the Real Gate Exam format to get familiar with the exam pattern.
- Flexible test schedules to suit your convenience and receive reminder notifications for the same.
- Additional preparation for in-person interviews by experienced trainers in the industry.
**Lastly, our impressive track record speaks for itself. Join the lineage of Past rank holders.**

# Whom this test-series is for?

**Courses offered for all the following branches:**

- CSE
- Chemical Engineering
- Mechanical Engineering
- Electrical & Electronics Engineering

- Electronics & Communication Engineering
- Instrumentation Engineering
- Civil Engineering

# Test Series:

## GATE Subject wise Preliminary Tests

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Simple stresses

2. Thermal stresses

3. Complex stresses and strains

4. SFD & BMD

5. Deflections & slopes

6. strain gauges & rosettes

7. testing of hardness and impact strength

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Working stress

2. Limit state and Ultimate load design concepts

3. Design of beams

4. slabs

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Properties of Fluids

2. fluid statistics (Manometry,buoyancy, forces on submerged bodies)

3. fluid kinematics (control volume analysis of mass & fluid acceleration)

4. fluid dynamics (control volume analysis of momentum & energy , differential equations of continuity and momentum, Bernoulli’s equation)

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Origin of soils Definitions & Index properties of soil

2. soil classification

3. Permeability

4. Effective stress

5. Seepage pressure & Critical hydraulic Gradient

6. Seepage analysis

7. Stressdistribution

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Water demand

2. Water Quality

3. Plain Sedimentation

4. Coagulation

5. Filtration

6. Disinfection

7. Miscellaneous Treatment

8. Distribution System

9. Air Pollution

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Highway Geometric Design & Planning

2. Highway materials and testing

3. Pavement design

4. Traffic Engineering

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Hydrologic cycle

2. precipitation

3. evaporation

4. evapo-transpiration

5. watershed

6. infiltration

7. unit hydrographs

8. hydrograph analysis

9. flood estimation and routing

10. reservoir capacity

11. reservoir and channel routing

12. surface run-off models

13. ground water hydrology - steady state well hydraulics and aquifers

14. Application of Darcy’s law.

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Duty

2. delta

3. estimation of evapo-transpiration

4. Crop water requirements

5. Design of lined and unlined canals

6. head works

7. gravity dams and spillways

8. Design of weirs on permeable foundation

9. Types of irrigation systems

10. irrigation methods

11. Water logging and drainage Canal regulatory works

12. Cross drainage structuresoutlets and escapes.

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Theory of simple bending

2. Centroids

3. moment of Inertia

4. Shear stress distribution in beams & Torsion

5. Thin cylinder & strain energy

6. Columns & struts

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Statically determinate and indeterminate structures by force/ energy methods

2. Method of superposition

3. Analysis of trusses

4. Arches

5. beams

6. cables and frames

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Consolidation

2. Compaction

3. Shear strength

4. Earth pressure

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Principles of surveying

2. Errors and their adjustment

3. Maps - scale

4. coordinate system

5. Distance and angle measurement – Levelling and trigonometric leveling

6. Traversing and triangulation survey

7. Total station

8. Horizontal and vertical curves

9. Photogrammetry - scale

10. flying height

11. Remote sensing - basics

12. platform and sensors

13. visualimage interpretation

14. Basics of Geographical information system (GIS)

15. Geographical Positioning system (GPS).

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. System of forces

2. free-body diagrams

3. equilibrium equations

4. Internal forces instructures

5. Friction and its applications

6. Kinematics of point mass and rigid body

7. Centre of mass

8. Euler’s equations of motion

9. Impulse-momentum

10. Energy methods

11. Principles of virtual work

12. ConstructionMaterials

13. Structural steel - composition

14. Material properties and behavior Concrete -constituents

15. mix design

16. short-term and longterm properties

17. Bricks and mortar

18. Timber

19. Bitumen

20. Construction Management

21. Types of construction projects

22. Tendering and construction contracts

23. Rate analysis and standard specifications

24. Cost estimation

25. Project planning and network analysis - PERTand CPM.

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Working stress

2. Limit state design concepts

3. Design of tension and compression members

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Displacement methods

2. Slope deflection and moment distribution methods

3. Influence lines

4. Stiffness and flexibility methods of structural analysis

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Columns

2. Bond and development length

3. Prestressed concrete

4. Analysis of beam sections at transfer and service loads

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Laminar flow

2. Turbulent flow & Boundary layer flow through pipes

3. head losses in pipes,bends etc

4. Hydraulic machines (Turbo-machinery, peltonwheel,francis and kaplan turbines impulse and reaction principles, velocity diagrams)

5. dimensional analysis

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Design of Sewers

2. Characteristics of Waste water

3. Treatment of Sewage

4. Sludge digestion

5. Trickling Filters

6. Activated sludge process

7. Oxidation ponds

8. Disposing of the Sewage

9. Effluents

10. Solid Waste Management

11. Noise Pollution

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Stability of slopes

2. Bearing capacity

3. Pile foundation

4. Soil exploration

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Geometric design of railway track

2. Airport runway length

3. taxiway and exit taxiway design.

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Beams and beam-columns

2. column bases

3. Connections - simple and eccentric

4. Beam column connections

5. plate girders and trusses

6. Plastic analysis of beams and frames

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. English grammar sentence completion

2. verbal analogies

3. word groups instructions

4. critical reasoning and verbal deduction

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Numerical computation

2. Numerical estimation

3. Numericalreasoning and data interpretation

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- 1. Simple stresses

2. Thermal stresses

3. Complex stresses and strains

4. SFD &BMD

5. Deflections &slopes

6. strain gauges & rosettes

7. testing of hardness and impact strength

8. Theory of simple bending

9. Centroids

10. moment of Inertia

11. Shear stress distribution in beams &Torsion

12. Thin cylinder & strain energy

13. Columns & struts

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- 1. Properties of Fluids

2. fluid statistics (Manometry,buoyancy, forces on submerged bodies

3. fluid kinematics (control volume analysis of mass & fluid acceleration)

4. fluid dynamics (control volume analysis of momentum & energy ,differential equations of continuity and momentum, Bernoulli’s equation)

5. Laminar flow

6. Turbulent flow & Boundary layer flow through pipes

7. head losses in pipes,bends etc

8. Hydraulic machines (Turbo-machinery, peltonwheel,francis and kaplan turbines impulse and reaction principles, velocity diagrams)

9. dimensional analysis

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- 1. Working stress

2. Limit state and Ultimate load design concepts

3. Design of beams

4. slabs

5. Columns

6. Bond and development length

7. Prestressed concrete

8. Analysis of beam sections at transfer and service loads

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- 1. Hydrologic cycle

2. precipitation

3. evaporation

4. evapo-transpiration

5. watershed

6. infiltration

7. unit hydrographs

8. hydrograph analysis

9. flood estimation and routing

10. reservoir capacity

11. reservoir and channel routing

12. surface run-off models

13. ground water hydrology - steady state well hydraulics and aquifers

14. Application of Darcy’s law.

15. Duty

16. delta

17. estimation of evapo-transpiration

18. Crop water requirements

19. Design of lined and unlined canals

20. head works

21. gravity dams and spillways

22. Design of weirs on permeable foundation

23. Types of irrigation systems

24. irrigation methods

25. Water logging and drainage Canal regulatory works

26. Cross drainage structuresoutlets and escapes.

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- 1. Working stress

2. Limit state design concepts

3. Design of tension and compression members

4. Beams and beam- columns

5. column bases

6. Connections - simple and eccentric

7. Beam column connections

8. plate girders and trusses

9. Plastic analysis of beams and frames

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- 1. Statically determinate and indeterminate structures by force/ energy methods

2. Method of superposition

3. Analysis of trusses

4. Arches

5. beams

6. cables and frames

7. Displacement methods

8. Slope deflection and moment distribution methods

9. Influence lines

10. Stiffness and flexibility methods of structural analysis

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- 1. Origin of soils Definitions & Index properties of soil

2. Soil classification

3 Permeability

4. Effective stress

5. Seepage pressure & Critical hydraulic Gradient

6. Seepage analysis

7. Stressdistribution

8. Consolidation

9. Compaction

10. Shear strength

11. Earth pressure

12. Stability of slopes

13. Bearing capacity

14. Pile foundation

15. Soil exploration

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- 1. Water demand

2. Water Quality

3. Plain Sedimentation

4. Coagulation

5. Filtration

6. Disinfection

7. Miscellaneous Treatment

8. Distribution System

9. Air Pollution

10. Design of Sewers

11. Characteristics of Waste water

12. Treatment of Sewage

13. Sludge digestion

14. Trickling Filters

15. Activated sludge process

16. Oxidation ponds

17. Disposing of the Sewage

18. Effluents

19. Solid Waste Management

20. Noise Pollution

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- 1. Highway Geometric Design & Planning

2. Highway materials and testing

3. Pavement design

4. Traffic Engineering

5. Geometric design of railway track

6. Airport runway length

7. taxiway and exit taxiwaydesign.

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- 1. System of forces

2. free-body diagrams

3. equilibrium equations

4. Internal forces instructures

5. Friction and its applications

6. Kinematics of point mass and rigid body

7. Centre of mass

8. Euler’s equations of motion

9. Impulse-momentum

10. Energy methods

11. Principles of virtual work

12. ConstructionMaterials

13. Structural steel - composition

14. Material properties and behavior Concrete -constituents

15. mix design

16. short-term and longterm properties

17. Bricks and mortar

18. Timber

19. Bitumen

20. Construction Management

21. Types of construction projects

22. Tendering and construction contracts

23. Rate analysis and standard specifications

24. Cost estimation

25. Project planning and network analysis - PERTand CPM.

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- 1. English grammar sentence completion

2. verbal analogies

3. word groups instructions

4. critical reasoning and verbal deduction

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- 1. Numerical computation

2. Numerical estimation

3. Numericalreasoning and data interpretation

- No Of Questions : 65 Total Marks : 100 Time limit : 180 Min
**Topics Covered**- All Subjects & All Topics

- No Of Questions : 65 Total Marks : 100 Time limit : 180 Min
**Topics Covered**- All Subjects & All Topics

- No Of Questions : 65 Total Marks : 100 Time limit : 180 Min
**Topics Covered**- All Subjects & All Topics

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Working stress

2. Limit state design concepts

3. Design of tension and compression members

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. System of forces

2. free-body diagrams

3. equilibrium equations

4. Internal forces instructures

5. Friction and its applications

6. Kinematics of point mass and rigid body

7. Centre of mass

8. Euler’s equations of motion

9. Impulse-momentum

10. Energy methods

11. Principles of virtual work

12. ConstructionMaterials

13. Structural steel - composition

14. Material properties and behavior

Concrete -constituents

15. mix design

16. short-term and longterm properties

17. Bricks and mortar

18. Timber

19. Bitumen

20. Construction Management

21. Types of construction projects

22. Tendering and construction contracts

23. Rate analysis and standard specifications

24. Cost estimation

25. Project planning and network analysis - PERTand CPM.

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Origin of soils Definitions & Index properties of soil

2. soil classification

3. Permeability

4. Effective stress

5. Seepage pressure & Critical hydraulic Gradient

6. Seepage analysis

7. Stressdistribution

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Simple stresses

2. Thermal stresses

3. Complex stresses and strains

4. SFD & BMD

5. Deflections &slopes

6. strain gauges & rosettes

7. testing of hardness and impact strength

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Hydrologic cycle

2. precipitation

3. evaporation

4. evapo-transpiration

5. watershed

6. infiltration

7. unit hydrographs

8. hydrograph analysis

9. flood estimation and routing

10. reservoir capacity

11. reservoir and channel routing

12. surface run-off models

13. ground water hydrology - steady state well hydraulics and aquifers

14. Application of Darcy’s law.

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Working stress

2. Limit state and Ultimate load design concepts

3. Design of beams

4. slabs

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Properties of Fluids

2. fluid statistics (Manometry,buoyancy, forces on submerged bodies

3. fluid kinematics (control volume analysis of mass & fluid acceleration)

4. fluid dynamics (control volume analysis of momentum & energy ,differential equations of continuity and momentum, Bernoulli’s equation)

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Statically determinate and indeterminate structures by force/ energy methods
2. Method of superposition
3. Analysis of trusses

4. Arches

5. beams

6. cables and frames

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Theory of simple bending

2. Centroids

3. moment of Inertia

4. Shear stress distribution in beams &Torsion

5. Thin cylinder & strain energy

6. Columns & struts

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Water demand

2. Water Quality

3. Plain Sedimentation

4. Coagulation

5. Filtration

6. Disinfection

7. Miscellaneous Treatment

8. Distribution System

9. Air Pollution

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Highway Geometric Design & Planning

2. Highway materials and testing

3. Pavement design

4. Traffic Engineering

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Beams and beam- columns

2. column bases

3. Connections - simple and eccentric

4. Beam column connections

5. plate girders and trusses

6. Plastic analysis of beams and frames

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Laminar flow

2. Turbulent flow & Boundary layer flow through pipes

3. head losses in pipes,bends etc

4. Hydraulic machines (Turbo-machinery, peltonwheel,francis and kaplan turbines impulse and reaction principles, velocity diagrams)

5. dimensional analysis

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Consolidation

2. Compaction

3. Shear strength

4. Earth pressure

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Columns

2. Bond and development length

3. Prestressed concrete

4. Analysis of beam sections at transfer and service loads

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Displacement methods

2. Slope deflection and moment distribution methods

3. Influence lines

4. Stiffness and flexibility methods of structural analysis

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Stability of slopes

2. Bearing capacity

3. Pile foundation

4. Soil exploration

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Design of Sewers

2. Characteristics of Waste water

3. Treatment of Sewage

4. Sludge digestion

5. Trickling Filters

6. Activated sludge process

7. Oxidation ponds

8. Disposing of the Sewage

9. Effluents

10. Solid Waste Management

11. Noise Pollution

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered****Linear Algebra**

1. Matrix Algebra

2. Systems of linear equations

3. Eigenvalues

4. Eigenvectors**Calculus**

5. Mean value theorems

6. Theorems of integral

7. calculus

8. Evaluation of definite and improper integrals

9. Partial Derivatives

10. Maxima and minima

11. Multiple integrals

12. Fourier series

13. Vector identities

14. Directional derivatives

15. Line integral

16. Surface integral

17. Volume integral

18. Stokes’s theorem

19. Gauss’s theorem

20. Green’s theorem**Differential equations**

21. First order equations (linear and nonlinear)

22. Higher order linear differential equations with constant coefficients

23. Method of variation of parameters

24. Cauchy’s equation

25. Euler’s equation

26. Initial and boundary value problems

27. Partial DifferentialEquations

28. Method of separation of variables.

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered****Complex variables**

1. Analytic functions

2. Cauchy’s integral theorem

3. Cauchy’s integral formula

4. Taylor series

5. Laurent series

6. Residue theorem

7. Solution integrals**Probability and Statistics**

8. Sampling theorems

9. Conditional probability

10. Mean

11. Median

12. Mode

13. Standard Deviation

14. Random variables

15. Discrete and Continuous distributions

16. Poisson distribution

17. Normal distribution

18. Binomial distribution

19. Correlation analysis

20. Regression analysis**Transform Theory**

21. Fourier Transform

22.Laplace Transform

23 z-Transform**Numerical Methods**

24.Solutions of nonlinear algebraic equations

25.Single and Multi-step methods for differential equations

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. English grammar sentence completion

2. verbal analogies

3. word groups instructions

4. critical reasoning and verbal deduction

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Numerical computation

2. Numerical estimation

3. Numericalreasoning and data interpretation

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- All topics are covered from the GATE Subjects
**Strength of Materials**and**Reinforced Concrete Cement**

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- All topics are covered from the GATE Subjects
**Construction Materials and Management****Steel Structures**

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- All topics are covered from the GATE Subjects
**Geo Technical Engineering**and**Fluid Mechanics**

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- All topics are covered from the GATE Subjects
**Hydrology**and**Irrigation**and**Surveying**

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- All topics are covered from the GATE Subjects
**Environmental Engineering**and**Transport Engineering**

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- All topics are covered from the GATE Subjects
**Engineering Mathematics**

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- All topics are covered from the GATE Subjects
**General Aptitude**

- No Of Questions : 65 Total Marks : 100 Time limit : 180 Min
**Topics Covered**- All Subjects & All Topics

- No Of Questions : 65 Total Marks : 100 Time limit : 180 Min
**Topics Covered**- All Subjects & All Topics

- No Of Questions : 65 Total Marks : 100 Time limit : 180 Min
**Topics Covered**- All Subjects & All Topics

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- All topics are covered from the GATE Subjects
**Hydrology**and**Irrigation**and**Surveying**

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- All topics are covered from the GATE Subjects
**Environmental Engineering**and**Fluid Mechanics**

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- All topics are covered from the GATE Subjects
**Geo Technical Engineering**and**Transportation Engineering**

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- All topics are covered from the GATE Subjects
**Strength of Material**and**Steel Structures**and**Construction Materials and Management**

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- All topics are covered from the GATE Subjects
**Structure Analysis**and**Reinforced Concrete Cement**

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- All topics are covered from the GATE Subjects
**Engineering Mathematics**

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- All topics are covered from the GATE Subjects
**General Aptitude**

- No Of Questions : 65 Total Marks : 100 Time limit : 180 Min
**Topics Covered**- GATE Model Test that covers all Civil subjects

- No Of Questions : 65 Total Marks : 100 Time limit : 180 Min
**Topics Covered**- GATE Model Test that covers all Civil subjects

- No Of Questions : 65 Total Marks : 100 Time limit : 180 Min
**Topics Covered**- GATE Model Test that covers all Civil subjects

- No Of Questions : 65 Total Marks : 100 Time limit : 180 Min
**Topics Covered**- GATE Model Test that covers all Civil subjects

- No Of Questions : 65 Total Marks : 100 Time limit : 180 Min
**Topics Covered**- GATE Model Test that covers all Civil subjects

- No Of Questions : 65 Total Marks : 100 Time limit : 180 Min
**Topics Covered**- GATE Model Test that covers all Civil subjects

# Let's see what our ex-students have to say -

__Civil Engineering Question Papers with Solutions__

__Civil Engineering Question Papers with Solutions__

* GATE 2020* is in high demand now a days without any doubt and the

*is a absolutely decisive in a scenario like this. With time constraint and the aptitude to understand the application of right concepts with clarity in given time frame remain as the core competence.*

**GATE score***in form*

**GATE Online Test Series Civil 2020***is a set of thoroughly researched and curated extensive*

**GATE civil Engineering question papers***series having 100000 vast repository of questions across 7 Engineering streams including*

**GATE CIVIL Engineering question papers with solutions***GATE online test series FREE for CIVIL*too. Population demographics along with explosion of urbanisation have augmented the need for sustainable and efficient infrastructure solutions. The constant need for innovative and cost effective ideas is the catalyst for creating more career opportunities for Civil in private as well as public sectors. Some of the core branches of Civil Engineering are Construction, Structural, Transportation, Hydraulic, Coastal and Ocean, Material, Urban, Environmental, Water Resource engineering. Currently the most lucrative and fastest growing stream of civil engineering is specialisation in Geotechnical Engineering.

The test series of * GATE CIVIL Engineering question papers with answer* comprises of 80+

*having Video Solutions, 43 Chapter & Topic wise Tests, 25 Subject & Multi Subject wise Tests and 12 Full Mock Tests adopting uniquely stimulating 3Vs Concept-Hint-Solution aspect to crack GATE efficiently. With an interface exactly resembling the real GATE known as GATE Simulator, the reports generated by these*

**GATE 2019 CIVIL Engineering solved papers***provides an intensive analysis and 360 degree perspective of your scores comprising of strengths, weaknesses as well as your ranking in comparison to other top aspirants. The*

**Gate question papers***designed as test series is by far the leading, first-rate course available which is created and curated on the basis of need for a concise, applicable and time-efficient methodology in an interactive, stimulating way for the aspirants to crack GATE as top rankers. Based on*

**GATE Civil Engineering previous years Question Papers***, we have assimilated in our module*

**GATE CIVIL Engineering question paper 2019***as well as*

**GATE Civil Engineering Answer Key***for quality practice.*

**GATE CIVIL Engineering question papers free download**# About Tutor

VANI Institute was established in the year 1991 at Hyderabad spreading its wings to all branches of engineering and to the cities of Bangalore, Pune, Chennai, Kochi, Kolkata and Bhubaneswar.

VANI Institute initially started coaching for AMIE gaining a good reputation it then started coaching for GATE, establishing itself as the best coaching institute for GATE, ESE and PSUs in the country.

#### First GATE Institute in India

VANI Institute is the first Institute in India to start GATE coaching. The Institute started coaching for GATE in all branches. Over the years time and again the students across the country have endorsed for VANI as the best coaching Institute for GATE, ESE and PSUs.

VANI Institute aims to provide the top class and quality training to the students by providing with all the facilities and study material which can lead them as toppers in GATE, ESE and PSU exams. It is also well known for effective teaching and personality development skills.

#### Award Winner of Best Coaching Institute for GATE ESE and PSUs

Quality always pays off. VANI Institute has proven this emphatically. IndiaEducation.com run by Blindwink Solutions Private Limited have awarded VANI Institute with Best Coaching Institute GATE,ESE & PSUs. Apart from this award VANI Institute has won 7 other awards in the past