Secure Your Way to the IITs.
It's Time to Upgrade your Education & Career.
QUALIFY GATE 2020.
Only two months to go for the exam.
Start your Preparation from the Comfort of Your Home.
Ask yourself
Do you just want to take the exam for the sake of it or do you actually want to ace the test?
Make your last moment of preparation count. Act on the 4 Ps of cracking gate -
Plan Prepare Practice Perform.
Brush up your concepts with the guidance of highly experienced faculty.
Why this course?
- Prepare with 81 extensively researched Mock tests.
- Hone your understanding of the concepts with in-depth video solutions for each question.
- Analyse your performance and benchmark against national topper to identify improvement areas.
- Take Tests simulated in the Real Gate Exam format to get familiar with the exam pattern.
- Flexible test schedules to suit your convenience and receive reminder notifications for the same.
- Additional preparation for in-person interviews by experienced trainers in the industry.
- Lastly, our impressive track record speaks for itself. Join the lineage of Past rank holders.
Whom this test-series is for?
Courses offered for all the following branches:
- CSE
- Chemical Engineering
- Mechanical Engineering
- Electrical & Electronics Engineering
- Electronics & Communication Engineering
- Instrumentation Engineering
- Civil Engineering
Test Series:
GATE Subject wise Preliminary Tests
- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
- Topics Covered
- 1.Network graph
2.KCL
3.KVL
4.Node and Mesh analysis
5.Transient response of dc and ac networks
6.Sinusoidal steady-state analysis
7.Resonance
8.Passive filters
9.Ideal current and voltage sources
- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
- Topics Covered
- 1.Thevenin's theorem
2.Norton’s theorem
3.Superposition theorem
4.Maximum power transfer theorem
5.Two-port networks
6.Three phase circuits
7.Power and power factor in ac circuits.
- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
- Topics Covered
- 1. Coulomb's Law
2. Electric Field Intensity
3. Electric Flux 4. Density
5. Gauss's Law
6. Divergence
7. Electric field and potential due to point ,line,plane and spherical charge distributions
8. Effect of dielectric medium
9. Capacitance of configurations.
- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
- Topics Covered
- 1. Coulomb's Law
2. Electric Field Intensity
3. Electric Flux 4. Density
5. Gauss's Law
6. Divergence
7. Electric field and potential due to point,line,plane and spherical charge distributions
8. Effect of dielectric medium
9. Capacitance of configurations
10.Biot-Savart’s law
11.Ampere’s law
12.Curl
13.Faraday’s law
14.Lorentz force
15.Inductance
16.Magnetomotive force
17.Reluctance
18.Magnetic circuits
19.Self and Mutual inductance of simple configurations.
- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
- Topics Covered
- 1. Representation of continuous and discrete time signals
2. Shifting and scaling operations
3. Linear Time Invariant and Causal systems.
- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
- Topics Covered
- 1. Fourier series representation of continuous periodic signals
2. Sampling theorem
3. Applications of Fourier Transform
4. Laplace Transform and z-Transform.
- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
- Topics Covered
- 1. Single phase transformer equivalent circuit
2. Phasor diagram open circuit and short circuit tests
3. Regulation and efficiency
4. Three phase transformers
5. connections
6. parallel operation
7. Auto-transformer
8. Electromechanical
9. energy conversion principles
10.DC machines: separately excited
11.series and shunt, motoring and generating mode of operation and their characteristics
12.starting and speed control of dc motors
- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
- Topics Covered
- 1. Three phase induction motors
2. principle of operation
3. types performance
4. torque-speed characteristics
5. Noload and blocked rotor tests
6. Equivalent circuit
7. Starting and speed control
8. Operating principle of single phase
9. induction motors
10.Synchronous machines
11.cylindrical and salient pole machines
12.performance
13.regulation and parallel operation of generators
14.Starting of synchronous motor characteristics
15.Types of losses and efficiency
16.calculations of electric machines.
- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
- Topics Covered
- 1. Power generation concepts
2. ac and dc transmission concepts
3. Models and performance of transmission linesand cables
4. Series and shunt compensation
5. Electric field distribution and insulators
6. Distribution systems,
7. Per-unit quantities
- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
- Topics Covered
- 1. Bus admittance matrix
2. Gauss Seidel and Newton-Raphson load flow methods
3. Voltage and Frequency Control
4. Power factor correction
5. Symmetrical components
6. Symmetrical and unsymmetrical fault analysis
7. Principles of over-current
8. differential and distance protection
9. Circuit breakers
10.System stability concepts
11.Equal area criterion
- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
- Topics Covered
- 1.Mathematical modeling and representation of systems
2.Feedback principle
3.Transfer function
4.Block diagrams and Signal flow graphs
5.Transient and Steady
6.state analysis of linear time invariant systems
- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
- Topics Covered
- 1. Routh-Hurwitz and Nyquist criteria
2. Bode plots
3. Root loci
4. Stability analysis
5. Lag
6. Lead and Lead-Lag compensators
7. PI and PID controllers
8. State space model
9. State transition matrix
- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
- Topics Covered
- 1. Bridges and Potentiometers
2. Measurement of voltage
3. current
4. power
5. Eenergy and power factor
6. Instrument
7. Transformers.
- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
- Topics Covered
- 1. Digital voltmeters and multimeters
2. Phase Time and Frequency measurement
3. Oscilloscopes
4. Error analysis.
- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
- Topics Covered
- 1. Characteristics of diodes
2. BJT
3. MOSFET
4. Simple diode circuits
5. Clipping
6. clamping
7. rectifiers
8. Amplifiers
9. Biasing
10.Equivalent circuit and Frequency response
11.Oscillators and Feedback amplifiers
12.Operational amplifiers
13.Characteristics and applications
14.Simple active filters
15.VCOs and Timers
- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
- Topics Covered
- 1. Combinational and Sequential logic circuits
2. Multiplexer
3. Demultiplexer
4. Schmitt trigger
5. Sample and hold circuits
6. A/D and D/A converters
7. 8085Microprocessor
8. Architecture
9. Programming and Interfacing
- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
- Topics Covered
- 1. Characteristics of semiconductor power device
2. Diode
3. Thyristor
4. Triac
5. GTO
6. MOSFET
7. GBT
8. DC to DC
9. Conversion
10.Buck
11.Boost and Buck-Boost converters
- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
- Topics Covered
- 1. Single and three phase configuration of uncontrolled rectifiers
2. Line commutated thyristor based converters
3. Bidirectional ac to dc voltage source converters
4. Issues of line current harmonics
5. Power factor
6. Distortion factor of ac to dc converters
7. Single phase and three phase inverters
8. Sinusoidal pulse width modulation
- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
- Topics Covered
- Linear Algebra
1. Matrix Algebra
2. Systems of linear equations
3. Eigenvalues
4. Eigenvectors
Calculus
5. Mean value theorems
6. Theorems of integral
7. calculus
8. Evaluation of definite and improper integrals
9. Partial Derivatives
10. Maxima and minima
11. Multiple integrals
12. Fourier series
13. Vector identities
14. Directional derivatives
15. Line integral
16. Surface integral
17. Volume integral
18. Stokes’s theorem
19. Gauss’s theorem
20. Green’s theorem
Differential equations
21. First order equations (linear and nonlinear)
22. Higher order linear differential equations with constant coefficients
23. Method of variation of parameters
24. Cauchy’s equation
25. Euler’s equation
26. Initial and boundary value problems
27. Partial DifferentialEquations
28. Method of separation of variables.
- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
- Topics Covered
- Complex variables
1. Analytic functions
2. Cauchy’s integral theorem
3. Cauchy’s integral formula
4. Taylor series
5. Laurent series
6. Residue theorem
7. Solution integrals.
Probability and Statistics
8. Sampling theorems
9. Conditional probability
10. Mean
11. Median
12. Mode
13. Standard Deviation
14. Random variables
15. Discrete and Continuous distributions
16. Poisson distribution
17. Normal distribution
18. Binomial distribution
19. Correlation analysis
20. Regression analysis
Transform Theory
21.Solutions of nonlinear algebraic equations
22.Single and Multi?step methods for differential equations
Numerical Methods 23.Fourier Transform
24.Laplace Transform
25 z-Transform
- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
- Topics Covered
- 1. English grammar sentence completion
2. verbal analogies
3. word groups instructions
4. critical reasoning and verbal deduction
- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
- Topics Covered
- 1. Numerical computation
2. Numerical estimation
3. Numericalreasoning and data interpretation
- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
- Topics Covered
- 1.Network graph
2.KCL
3.KVL
4.Node and Mesh analysis
5.Transient response of dc and ac networks
6.Sinusoidal steady-state analysis
7.Resonance
8.Passive filters
9.Ideal current and voltage sources
10.Thevenin's theorem
11.Norton’s theorem
12.Superposition theorem
13.Maximum power transfer theorem
14.Two-port networks
15.Three phase circuits
16.Power and power factor in ac circuits.
- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
- Topics Covered
- 1.Coulomb's Law
2.Electric Field Intensity
3.Electric Flux
4.Density
5.Gauss's Law
6.Divergence
7.Electric field and potential due to point ,line,plane and spherical charge distributions
8.Effect of dielectric medium
9.Capacitance of configurations
- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
- Topics Covered
- 1. Representation of continuous and discrete-time signals
2. Shifting and scaling operations
3. Linear Time Invariant and Causal systems
4. Fourier series representation of continuous periodic signals
5. Sampling theorem
6. Applications of Fourier Transform
7. Laplace Transform and z-Transform.
- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
- Topics Covered
- 1.Single phase transformer equivalent circuit
2.Phasor diagram open circuit and short circuit tests
3.Regulation and efficiency
4.Three phase transformers
5.Connections
6.parallel operation
7.Auto-transformer
8.Electromechanical
9.Energy conversion principles
10.DC machines: separately excited
11.series and shunt, motoring and generating mode of operation and their characteristics
12.starting and speed control of dc motors
13.Three phase induction motors
14.principle of operation
15.types performance
16.torque-speed characteristics
17.Noload and blocked rotor tests
18.Equivalent circuit
19.Starting and speed control
20.Operating principle of single phase
21.induction motors
22.Synchronous machines
23.cylindrical and salient pole machines
24.Performance
25.Regulation and parallel operation of generators
26.Starting of synchronous motor characteristics
27.Types of losses and efficiency
28.Calculations of electric machines.
- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
- Topics Covered
- 1.Power generation concepts
2.ac and dc transmission concepts
3.Models and performance of transmission linesand cables
4.Series and shunt compensation
5.Electric field distribution and insulators
6.Distribution systems
7.Per-unit quantities
8.Bus admittance matrix
9.Gauss Seidel and Newton-Raphson load flow methods
10.Voltage and Frequency Control
11.Power factor correction
12.Symmetrical components
13.Symmetrical and unsymmetrical fault analysis
14.Principles of over current
15.differential and distance protection
16.Circuit breakers
17.System stability concepts
18.Equal area criterion
- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
- Topics Covered
- 1.Mathematical modeling and representation of systems
2.Feedback principle
3.Transfer function
4.Block diagrams and Signal flow graphs
5.Transient and Steady-state analysis of linear time invariant systems
6.Routh-Hurwitz and Nyquist criteria
7.Bode plots
8.Root loci
9.Stability analysis
10.Lag
11.Lead and Lead?Lag compensators
12.PI and PID controllers
13.State space model
14.State transition matrix
- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
- Topics Covered
- 1.Bridges and Potentiometers
2.Measurement of voltage
3.Current
4.Power
5.Energy and power factor
6.Instrument
7.Transformers
8.Digital voltmeters and multimeters
9.Phase Time and Frequency measurement
10.Oscilloscopes
11.Error analysis.
- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
- Topics Covered
- 1.Characteristics of diodes
2.BJT
3.MOSFET
4.Simple diode circuits
5.Clipping
6.clamping
7.rectifiers
8.Amplifiers
9.Biasing
10.Equivalent circuit and Frequency response
11.Oscillators and Feedback amplifiers
12.Operational amplifiers
13.Characteristics and applications
14.Simple active filters
15.VCOs and Timers
16.Combinational and Sequential logic circuits
17.Multiplexer
18.Demultiplexer
19.Schmitt trigger
20.Sample and hold circuits
21.A/D and D/A converters
21.8085 Microprocessor
22.Architecture
23.Programming and Interfacing
- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
- Topics Covered
- 1.Characteristics of semiconductor power device
2.Diode
3.Thyristor
4.Triac
5.GTO
6.MOSFET
7.GBT
8.DC to DC
9.Conversion
10.Buck
11.Boost and Buck-Boost converters
12.Single and three phase configuration of uncontrolled rectifiers
13.Line commutated thyristor based converters
14.Bidirectional ac to dc voltage source converters
15.Issues of line current harmonics
16.Power factor
17.Distortion factor of ac to dc converters
18.Single phase and three phase inverters
19.Sinusoidal pulse width modulation
- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
- Topics Covered
- Linear Algebra
1. Matrix Algebra
2. Systems of linear equations
3. Eigenvalues
4. Eigenvectors
Calculus
5. Mean value theorems
6. Theorems of integral
calculus
7. Evaluation of definite and improper integrals
8. Partial Derivatives
9. Maxima and minima
10.Multiple integrals
11.Fourier series
12.Vector identities
13.Directional derivatives
14.Line integral
15.Surface integral
16.Volume integral
17.Stokes’s theorem
18.Gauss’s theorem
19.Green’s theorem
Differential equations
20.First order equations (linear and nonlinear)
21.Higher order linear differential equations with constant coefficients
22.Method of variation of parameters
23.Cauchy’s equation
24.Euler’s equation
25.Initial and boundary value problems
26.Partial DifferentialEquations
27.Method of separation of variables
Complex variables
28. Analytic functions
29.Cauchy’s integral theorem
30.Cauchy’s integral formula
31.Taylor series
32.Laurent series
33.Residue theorem
34.Solution integrals
Probability and Statistics 35.Sampling theorems
36.Conditional probability
37.Mean
38.Median
39.Mode
40.Standard Deviation
41.Random variables
42.Discrete and Continuous distributions
43.Poisson distribution
44.Normal distribution
45.Binomial distribution
46.Correlation analysis
47.Regression analysis
Transform Theory
48.Solutions of nonlinear algebraic equations
49.Single and Multi?step methods for differential equations
Numerical Methods
50.Fourier Transform
51.Laplace Transform
52.z-Transform
- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
- Topics Covered
- 1. English grammar sentence completion
2. verbal analogies
3. word groups instructions
4. critical reasoning and verbal deduction
5. Numerical computation
6. Numerical estimation
7. Numericalreasoning and data interpretation
- No Of Questions : 65 Total Marks : 100 Time limit : 180 Min
- Topics Covered
- All Subjects & All Topics
- No Of Questions : 65 Total Marks : 100 Time limit : 180 Min
- Topics Covered
- All Subjects & All Topics
- No Of Questions : 65 Total Marks : 100 Time limit : 180 Min
- Topics Covered
- All Subjects & All Topics
- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
- Topics Covered
- 1.Network graph
2.KCL
3.KVL
4.Node and Mesh analysis
5.Transient response of dc and ac networks
6.Sinusoidal steady-state analysis
7.Resonance
8.Passive filters
9.Ideal current and voltage sources
- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
- Topics Covered
- 1.Thevenin's theorem
2.Norton’s theorem
3.Superposition theorem
4.Maximum power transfer theorem
5.Two-port networks
6.Three phase circuits
7.Power and power factor in ac circuits.
- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
- Topics Covered
- 1. Coulomb's Law
2. Electric Field Intensity
3. Electric Flux
4. Density
5. Gauss's Law
6. Divergence
7. Electric field and potential due to point,line,plane and spherical charge distributions
8. Effect of dielectric medium
9. Capacitance of configurations.
- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
- Topics Covered
- 1. Coulomb's Law
2. Electric Field Intensity
3. Electric Flux
4. Density
5. Gauss's Law
6. Divergence
7. Electric field and potential due to point ,line,plane and spherical charge distributions
8. Effect of dielectric medium
9. Capacitance of configurations
10.Biot-Savart’s law
11.Ampere’s law
12.Curl
13.Faraday’s law
14.Lorentz force
15.Inductance
16.Magnetomotive force
17.Reluctance
18.Magnetic circuits
19.Self and Mutual inductance of simple configurations.
- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
- Topics Covered
- 1. Representation of continuous and discrete-time signals
2. Shifting and scaling operations
3. Linear Time Invariant and Causal systems.
- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
- Topics Covered
- 1. Fourier series representation of continuous periodic signals
2. Sampling theorem
3. Applications of Fourier Transform
4. Laplace Transform and z-Transform.
- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
- Topics Covered
- 1. Single phase transformer equivalent circuit
2. Phasor diagram open circuit and short circuit tests
3. Regulation and efficiency
4. Three phase transformers
5. connections
6. parallel operation
7. Auto-transformer
8. Electromechanical
9. energy conversion principles
10.DC machines: separately excited
11.series and shunt, motoring and generating mode of operation and their characteristics
12.starting and speed control of dc motors
- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
- Topics Covered
- 1. Three phase induction motors
2. principle of operation
3. types performance
4. torque-speed characteristics
5. Noload and blocked rotor tests
6. Equivalent circuit
7. Starting and speed control
8. Operating principle of single phase
9. induction motors
10.Synchronous machines
11.cylindrical and salient pole machines
12.performance
13.regulation and parallel operation of generators
14.Starting of synchronous motor characteristics
15.Types of losses and efficiency
16.calculations of electric machines.
- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
- Topics Covered
- 1. Power generation concepts
2. ac and dc transmission concepts
3. Models and performance of transmission linesand cables
4. Series and shunt compensation
5. Electric field distribution and insulators
6. Distribution systems
7. Per-unit quantities
- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
- Topics Covered
- 1. Bus admittance matrix
2. Gauss Seidel and Newton-Raphson load flow methods
3. Voltage and Frequency Control
4. Power factor correction
5. Symmetrical components
6. Symmetrical and unsymmetrical fault analysis
7. Principles of over-current
8. differential and distance protection
9. Circuit breakers
10.System stability concepts
11.Equal area criterion
- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
- Topics Covered
- 1.Mathematical modeling and representation of systems
2.Feedback principle
3.Transfer function
4.Block diagrams and Signal flow graphs
5.Transient and Steady-state analysis of linear time invariant systems
- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
- Topics Covered
- 1. Routh-Hurwitz and Nyquist criteria
2. Bode plots
3. Root loci
4. Stability analysis
5. Lag
6. Lead and Lead Lag compensators
7. PI and PID controllers
8. State space model
9. State transition matrix
- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
- Topics Covered
- 1. Bridges and Potentiometers
2. Measurement of voltage
3. current
4. power
5. Eenergy and power factor
6. Instrument
7. Transformers.
- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
- Topics Covered
- 1. Digital voltmeters and multimeters
2. Phase Time and Frequency measurement
3. Oscilloscopes
4. Error analysis.
- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
- Topics Covered
- 1. Characteristics of diodes
2. BJT
3. MOSFET
4. Simple diode circuits
5. Clipping
6. clamping
7. rectifiers
8. Amplifiers
9. Biasing
10.Equivalent circuit and Frequency response
11.Oscillators and Feedback amplifiers
12.Operational amplifiers
13.Characteristics and applications
14.Simple active filters
15.VCOs and Timers
- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
- Topics Covered
- 1. Combinational and Sequential logic circuits
2. Multiplexer
3. Demultiplexer
4. Schmitt trigger
5. Sample and hold circuits
6. A/D and D/A converters
7. 8085 Microprocessor
8. Architecture
9. Programming and Interfacing
- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
- Topics Covered
- 1. Characteristics of semiconductor power device
2. Diode
3. Thyristor
4. Triac
5. GTO
6. MOSFET
7. GBT
8. DC to DC
9. Conversion
10.Buck
11.Boost and Buck-Boost converters
- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
- Topics Covered
- 1. Single and three phase configuration of uncontrolled rectifiers
2. Line commutated thyristor based converters
3. Bidirectional ac to dc voltage source converters
4. Issues of line current harmonics
5. Power factor
6. Distortion factor of ac to dc converters
7. Single phase and three phase inverters
8. Sinusoidal pulse width modulation
- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
- Topics Covered
- Linear Algebra
1. Matrix Algebra
2. Systems of linear equations
3. Eigenvalues
4. Eigenvectors
Calculus
5. Mean value theorems
6. Theorems of integral
7. calculus
8. Evaluation of definite and improper integrals
9. Partial Derivatives
10. Maxima and minima
11. Multiple integrals
12. Fourier series
13. Vector identities
14. Directional derivatives
15. Line integral
16. Surface integral
17. Volume integral
18. Stokes’s theorem
19. Gauss’s theorem
20. Green’s theorem
Differential equations
21. First order equations (linear and nonlinear)
22. Higher order linear differential equations with constant coefficients
23. Method of variation of parameters
24. Cauchy’s equation
25. Euler’s equation
26. Initial and boundary value problems
27. Partial DifferentialEquations
28. Method of separation of variables.
- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
- Topics Covered
- Complex variables
1. Analytic functions
2. Cauchy’s integral theorem
3. Cauchy’s integral formula
4. Taylor series
5. Laurent series
6. Residue theorem
7. Solution integrals.
Probability and Statistics
8. Sampling theorems
9. Conditional probability
10. Mean
11. Median
12. Mode
13. Standard Deviation
14. Random variables
15. Discrete and Continuous distributions
16. Poisson distribution
17. Normal distribution
18. Binomial distribution
19. Correlation analysis
20. Regression analysis
Transform Theory
21.Solutions of nonlinear algebraic equations
22.Single and Multi-step methods for differential equations
Numerical Methods 23.Fourier Transform
24.Laplace Transform
25 z-Transform
- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
- Topics Covered
- 1. English grammar sentence completion
2. verbal analogies
3. word groups instructions
4. critical reasoning and verbal deduction
- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
- Topics Covered
- 1. Numerical computation
2. Numerical estimation
3. Numericalreasoning and data interpretation
- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
- Topics Covered
- All topics are covered from the GATE Subjects Electric Circuits & Electro magnetic fields
- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
- Topics Covered
- All topics are covered from the GATE Subjects Signals and Systems & Electrical Machines
- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
- Topics Covered
- All topics are covered from the GATE Subjects Control Systems & Electrical and Electronic Measurements
- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
- Topics Covered
- All topics are covered from the GATE Subjects Power Electronics and Analog & Digital Electronics
- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
- Topics Covered
- All topics are covered from the GATE Subjects Power System
- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
- Topics Covered
- All topics are covered from the GATE Subjects Engineering Mathematics
- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
- Topics Covered
- All topics are covered from the GATE Subjects General Aptitude
- No Of Questions : 65 Total Marks : 100 Time limit : 180 Min
- Topics Covered
- All Subjects & All Topics
- No Of Questions : 65 Total Marks : 100 Time limit : 180 Min
- Topics Covered
- All Subjects & All Topics
- No Of Questions : 65 Total Marks : 100 Time limit : 180 Min
- Topics Covered
- All Subjects & All Topics
- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
- Topics Covered
- All topics are covered from the GATE Subjects Electric Circuits & Electro magnetic fields
- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
- Topics Covered
- All topics are covered from the GATE Subjects Signals and Systems & Electrical Machines
- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
- Topics Covered
- All topics are covered from the GATE Subjects Control Systems & Electrical and Electronic Measurements
- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
- Topics Covered
- All topics are covered from the GATE Subjects Power Electronics & Analog and Digital Electronics
- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
- Topics Covered
- All topics are covered from the GATE Subjects Power System
- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
- Topics Covered
- All topics are covered from the GATE Subjects Engineering Mathematics
- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
- Topics Covered
- All topics are covered from the GATE Subjects General Aptitude
- No Of Questions : 65 Total Marks : 100 Time limit : 180 Min
- Topics Covered
- All Topics3 Questions
- ALL TOPICS3 Questions
- 1 mark General aptitude2 Questions
- 2 mark General aptitude1 Questions
- G.A - 2mark1 Questions
- Mathematics -1mark2 Questions
- Technical -2mark3 Questions
- Mathematics3 Questions
- Technical-1-Mark3 Questions
- Technical-1mark3 Questions
- Technical-1mark3 Questions
- Technical6 Questions
- Technical-1mark3 Questions
- Mathematics1 Questions
- Technical2 Questions
- Technical All Topics3 Questions
- EE-76 (GATE MOCK-1)3 Questions
- MINI GATE-1 (MECH)2 Questions
- MINI GATE-1 (EEE)1 Questions
- EE-77 (GATE MOCK-2)3 Questions
- EE-78 (GATE MOCK-3)3 Questions
- EE-79 (GATE MOCK-4)3 Questions
- EE-80 (GATE MOCK-5)3 Questions
- MINI GATE-2 (EEE)2 Questions
- EC-73(GATE MOCK 5)2 Questions
- EE-81 (GATE MOCK-6)1 Questions
- No Of Questions : 65 Total Marks : 100 Time limit : 180 Min
- Topics Covered
- GATE Mock Test that covers all EEE subjects
- No Of Questions : 65 Total Marks : 100 Time limit : 180 Min
- Topics Covered
- GATE Mock Test that covers all EEE subjects
- No Of Questions : 65 Total Marks : 100 Time limit : 180 Min
- Topics Covered
- GATE Mock Test that covers all EEE subjects
- No Of Questions : 65 Total Marks : 100 Time limit : 180 Min
- Topics Covered
- GATE Mock Test that covers all EEE subjects
- No Of Questions : 65 Total Marks : 100 Time limit : 180 Min
- Topics Covered
- GATE Mock Test that covers all EEE subjects
Let's see what our ex-students have to say -
-
CHEMICAL, AIR-1stExcellent!!! Great knowledge imparted. Taught from the basics with concepts. Amazing GATE online test series by Vani Institute in association with AspireBuzz. Helped me a lot to secure the AIR top rank in Gate-17.
-
CIVIL, AIR-2nd, 2017Best quality materials and guidance, immensely helped me to secure All India GATE Rank 2, in Civil Engineering. Most of the questions included in their GATE Online preparation tests for Civil are similar to the questions I got in the actual GATE exam.
-
CSE, AIR-3rdVery good coaching and GATE online preparation platform with excellent mock tests that has subject tests, mock tests and grand tests. I thank all the faculty for helping me ace GATE. I am glad that VANI has collaborated with Aspirebuzz.com to provide the course material in form of videos. I wish I had them when I wrote GATE exam.
-
ECE, AIR-2ndPractice makes man perfect this statement is very true and it has been proven with the online GATE preparation platform provided by VANI Institute in collaboration with AspireBuzz. I was able to practice a lot with the Test Series and that has raised my confidence level. I also liked their GATE study material. It made it so easy for me to secure All India GATE Rank 2.
-
EEE, AIR-1stI thank VANI for providing such a talented, experienced and highly professional faculty. Excellent material and very high quality test series on their GATE online preparation platform by AspireBuzz.
-
MECH, AIR-3rdLearning concepts and knowing when and how to apply them is what you are tested in GATE. I am glad I have joined VANI for my preparation. The faculty is very experienced as each of them have trained close to 200 batches for GATE preparation. The question papers that were provided in the test series on their GATE preparation online platform by AspireBuzz helped me a lot in reaching my goal.
-
IN, AIR-4thI would like to thank for providing me the best resources for my GATE exam preparation. I had taken the online test series on their online GATE preparation platform. The way test series are arranged was awesome, the explanation and solutions provided were excellent especially for analog and digital.
Which GATE Test Series is best?
The national level engineering entrance GATE test series is coveted without a doubt and the GATE score is critically a deciding factor in a competitive scenario like this. Engineering academies that offer the test series are aware that time is limited and the aptitude to apply the right concepts with in-depth analytical clarity in stipulated time frame will sure act as the core competence. While hard work and determination are important to crack GATE, especially through the ACE online test, it is equally crucial to have a robust planning and focused guidance which cannot be ignored. The online GATE test is a set of thoroughly researched and meticulously curated extensive online practise test series with over 1,00,000 vast repository of questions across 7 Engineering streams including flat out GATE test series free and Free mock test for GATE too to outperform.
The Online Test Series for GATE is by far the first-rate, leading module available comprising of 80+ Tests with Video Solutions, 43 Chapter & Topic-wise Tests, 25 Subject & Multi Subject wise Tests and 12 Full Mock Tests adopting uniquely stimulating 3Vs Concept-Hint-Solution aspect to crack Online GATE Test series, efficiently. Moreover while attempting these relevant tests, students are provided with an interface exactly resembling the real GATE online test series, known as GATE Simulator. On the other hand, the report generated by the GATE Free Online Test Series by The VANI Institute in association with AspireBuzz provides an intensive analysis of scores comprising of strengths, weaknesses as well as your ranking in comparison to other top aspirants. Thus it offers a 360 degree perspective of your performance to understand and decide the course of action you need to take towards improvement/progress of your ranks further to ace GATE 2021 with much ease. Our result-driven robust GATE test series app TarGATE provides Systematic approach where students undergo concept assimilation, subject tests and finally grand test (mimicking original exam)
How AspireBuzz GATE Electrical Engineering online tests offers competitive edge?
GATE is coveted without a doubt and the GATE rank is a critically determining factor in a competitive scenario like this. Being aware that time is limited and the aptitude to apply the right concepts with in-depth analytical clarity in stipulated time frame sure acts as the core competence. Our GATE EEE online test series is a set of thoroughly researched and meticulously curated extensive online Electrical Engineering online mcq test with over 100000 vast repository of questions across 7 Engineering streams including flat out free online test for Electrical Engineering too. Out of all streams, employability in the domain-specific roles was the highest for Electronics Engineering(EEE) at 7.07 per cent according to a survey data. Of late the stream of EEE is sub-categorised into many sub streams like electronics, digital computers, power engineering, telecommunications, control systems, radio-frequency engineering, signal processing, instrumentation, and microelectronics.
The Electrical Engineering online tests preparation comprises of 80+ Tests with Video Solutions, 43 Chapter & Topic wise Tests, 25 Subject & Multi Subject wise Tests and 12 Full Mock Tests adopting uniquely stimulating 3Vs Concept-Hint-Solution aspect to crack GATE efficiently. With an interface exactly resembling the real GATE known as GATE Simulator, the reports generated by the online objective test Electrical Engineering modules provides an intensive analysis and 360 degree perspective of your scores comprising of strengths, weaknesses as well as your ranking in comparison to other top aspirants. The GATE Electrical Engineering online test module is by far the leading, first-rate course available which is created with an objective towards conceptual and analytical clarity for smooth, effortless understanding by students to ace GATE.
About Tutor
VANI Institute was established in the year 1991 at Hyderabad spreading its wings to all branches of engineering and to the cities of Bangalore, Pune, Chennai, Kochi, Kolkata and Bhubaneswar.
VANI Institute initially started coaching for AMIE gaining a good reputation it then started coaching for GATE, establishing itself as the best coaching institute for GATE, ESE and PSUs in the country.
First GATE Institute in India
VANI Institute is the first Institute in India to start GATE coaching. The Institute started coaching for GATE in all branches. Over the years time and again the students across the country have endorsed for VANI as the best coaching Institute for GATE, ESE and PSUs.
VANI Institute aims to provide the top class and quality training to the students by providing with all the facilities and study material which can lead them as toppers in GATE, ESE and PSU exams. It is also well known for effective teaching and personality development skills.
Award Winner of Best Coaching Institute for GATE ESE and PSUs
Quality always pays off. VANI Institute has proven this emphatically. IndiaEducation.com run by Blindwink Solutions Private Limited have awarded VANI Institute with Best Coaching Institute GATE,ESE & PSUs. Apart from this award VANI Institute has won 7 other awards in the past