### Secure Your Way to the IITs.

It's Time to Upgrade your Education & Career.

**QUALIFY GATE 2020.**

Only two months to go for the exam.

Start your Preparation from the Comfort of Your Home.

### Ask yourself

Do you just want to take the exam for the sake of it or do you actually want to ace the test?

Make your last moment of preparation count. Act on the 4 Ps of cracking gate -

**Plan Prepare Practice Perform.**

Brush up your concepts with the guidance of highly experienced faculty.

# Why this course?

- Prepare with 81 extensively researched Mock tests.
- Hone your understanding of the concepts with in-depth video solutions for each question.
- Analyse your performance and benchmark against national topper to identify improvement areas.
- Take Tests simulated in the Real Gate Exam format to get familiar with the exam pattern.
- Flexible test schedules to suit your convenience and receive reminder notifications for the same.
- Additional preparation for in-person interviews by experienced trainers in the industry.
**Lastly, our impressive track record speaks for itself. Join the lineage of Past rank holders.**

# Whom this test-series is for?

**Courses offered for all the following branches:**

- CSE
- Chemical Engineering
- Mechanical Engineering
- Electrical & Electronics Engineering

- Electronics & Communication Engineering
- Instrumentation Engineering
- Civil Engineering

# Test Series:

## GATE Subject wise Preliminary Tests

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Free body diagrams and equilibrium

2. Trusses and frames

3. virtual work

4. kinematics and dynamics of particles and of rigid bodies in plane motion

5. impulse and momentum (linear and angular) and energy formulations

6. collisions.

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Simple stresses

2. Thermal stresses

3. Complex stresses and strains

4. SFD & BMD

5. Deflections & slopes

6. strain gauges & rosettes

7. testing of hardness and impact strength

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Properties of Fluids

2. fluid statistics (Manometry,buoyancy, forces on submerged bodies)

3. fluid kinematics (control volume analysis of mass & fluid acceleration)

4. fluid dynamics (control volume analysis of momentum & energy , differential equations of continuity and momentum, Bernoulli’s equation)

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Basic concepts

2 Zeroth law

3. Work & heat

4. First law of thermodynamics

5. Second law of thermodynamics and Entropy Availability

6. properties of pure substances

7. vapour and gas power cycles

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Design for static loading failure theories & variable loading riveted

2. bolted & welded joints

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Conduction

2. Fins & convection

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Analysis of planar mechanisms

2. Dynamic analysis of slider – crank mechanism

3. fly wheels

4. vibrations

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Metal casting

2. welding metal forming & sheet

3. metal operations

4. Metal cutting, machining

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Inventory control

2. production planning

3. Control scheduling & sequencing

4. Line balancing

5. Forecasting materials requirement planning

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered****Linear Algebra**

1. Matrix Algebra

2. Systems of linear equations

3. Eigenvalues

4. Eigenvectors**Calculus**

5. Mean value theorems

6. Theorems of integral

7. calculus

8. Evaluation of definite and improper integrals

9. Partial Derivatives

10. Maxima and minima

11. Multiple integrals

12. Fourier series

13. Vector identities

14. Directional derivatives

15. Line integral

16. Surface integral

17. Volume integral

18. Stokes’s theorem

19. Gauss’s theorem

20. Green’s theorem**Differential equations**

21. First order equations (linear and nonlinear)

22. Higher order linear differential equations with constant coefficients

23. Method of variation of parameters

24. Cauchy’s equation

25. Euler’s equation

26. Initial and boundary value problems

27. Partial DifferentialEquations

28. Method of separation of variables.

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Theory of simple bending

2. Centroids

3. moment of Inertia

4. Shear stress distribution in beams &Torsion

5. Thin cylinder & strain energy

6. Columns & struts

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Laminar flow

2. Turbulent flow & Boundary layer flow through pipes

3. head losses in pipes,bends etc

4. Hydraulic machines (Turbo-machinery, peltonwheel,francis and kaplan turbines impulse and reaction principles, velocity diagrams)

5. dimensional analysis

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Air and ags compressors

2. I.C engines

3. Air standard Otto diesel and dual cycles

4. Refrigeration and air-conditioning

5. Vapour and gas refrigeration

6. Concepts of refrigeration and reheat and heat pump cycles

7. properties of moist air

8. Psychometric chart

9. Basic psychometric processes

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Shafts

2. sliding and rolling contact bearings

3. clutches and brakes

4. gears & springs

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Unsteady heat conduction

2. radiation & heat exchangers

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Gears & gear trains

2. cams

3. governors

4. balancing of reciprocating and rotating masses

5. Gyroscope

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Metrology and inspection CNC M/C

2. NTM CIM & engineering materials

3. Jigs & Fixtures

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. PERT & CPM

2. Linear programming

3. Simplex transportation & assignment

4. Simple queuing models

5. Network flow models

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered****Complex variables**

1. Analytic functions

2. Cauchy’s integral theorem

3. Cauchy’s integral formula

4. Taylor series

5. Laurent series

6. Residue theorem

7. Solution integrals**Probability and Statistics**

8. Sampling theorems

9. Conditional probability

10. Mean

11. Median

12. Mode

13. Standard Deviation

14. Random variables

15. Discrete and Continuous distributions

16. Poisson distribution

17. Normal distribution

18. Binomial distribution

19. Correlation analysis

20. Regression analysis**Transform Theory**

21. Fourier Transform

22. Laplace Transform

23. z-Transform**Numerical Methods**

24. Solutions of nonlinear algebraic equations

25. Single and Multi?step methods for differential equations

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. English grammar sentence completion

2. verbal analogies

3. word groups instructions

4. critical reasoning and verbal deduction

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Numerical computation

2. Numerical estimation

3. Numericalreasoning and data interpretation

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- 1. Free body diagrams and equilibrium

2. Trusses and frames

3. virtual work

4. kinematics and dynamics of particles and of rigid bodies in plane motion

5. impulse and momentum (linear and angular) and energy formulations

6. Collisions

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- 1.Simple stresses

2. Thermal stresses

3. Complex stresses and strains

4. SFD & BMD

5. Deflections &slopes

6. strain gauges & rosettes

7. testing of hardness and impact strength

8. Theory of simple bending

9. Centroids

10. moment of Inertia

11. Shear stress distribution in beams & Torsion

12. Thin cylinder & strain energy

13. Columns & struts

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- 1. Basic concepts

2 Zeroth law

3. Work & heat

4. First law of thermodynamics

5. Second law of thermodynamics and Entropy Availability

6. properties of pure substances

7. vapour and gas power cycles

8. Air and ags compressors

9. I.C engines

10. Air standard Otto diesel and dual cycles

11. Refrigeration and air-conditioning

12. Vapour and gas refrigeration

13. Concepts of refrigeration and reheat and heat pump cycles

14. properties of moist air

15. Psychometric chart

16. Basic psychometric processes

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- 1.Properties of Fluids

2. fluid statistics (Manometry,buoyancy, forces on submerged bodies)

3. fluid kinematics (control volume analysis of mass & fluid acceleration)

4. fluid dynamics (control volume analysis of momentum & energy ,differential equations of continuity and momentum, Bernoulli’s equation)

5. Laminar flow

6. Turbulent flow & Boundary layer flow through pipes

7. head losses in pipes,bends etc

8. Hydraulic machines (Turbo-machinery, peltonwheel,francis and kaplan turbines impulse and reaction principles, velocity diagrams)

9. dimensional analysis

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- 1. Conduction

2. Fins & convection

3. Unsteady heat conduction

4. radiation & heat exchangers

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- 1. Analysis of planar mechanisms

2. Dynamic analysis of slider – crank mechanism

3. fly wheels

4. vibrations

5. Gears & gear trains

6. cams governors

7. balancing of reciprocating and rotating masse

8. Gyroscope

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- 1. Design for static loading

2. failure theories

3. variable loading

4. riveted, bolted & welded joints

5. Shafts

6. sliding and rolling contact bearings

7. clutches and brakes

8. gears & springs

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- 1. Metal casting

2. welding metal forming & sheet

3. Metal operations

4. Metal cutting

5. machining

6. Metrology and inspection CNC M/C, NTM, CIM & engineering materials

7. Jjigs & Fixtures

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- 1.Inventory control

2. production planning

3. Control scheduling & sequencing

4. Line balancing

5. Forecasting materials requirement planning

6. PERT & CPM

7. Linear programming

8. Simplex transportation & assignment

9. Simple queuing models

10. Network flow models

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered****Linear Algebra**

1. Matrix Algebra

2. Systems of linear equations

3. Eigenvalues

4. Eigenvectors**Calculus**

5. Mean value theorems

6. Theorems of integral**calculus**

7. Evaluation of definite and improper integrals

8. Partial Derivatives

9. Maxima and minima

10. Multiple integrals

11. Fourier series

12. Vector identities

13. Directional derivatives

14. Line integral

15. Surface integral

16. Volume integral

17. Stokes’s theorem

18. Gauss’s theorem

19. Green’s theorem**Differential equations**

20. First order equations (linear and nonlinear)

21. Higher order linear differential equations with constant coefficients

22. Method of variation of parameters

23. Cauchy’s equation

24. Euler’s equation

25. Initial and boundary value problems

26. Partial DifferentialEquations

27. Method of separation of variables**Complex variables**

28. Analytic functions

29. Cauchy’s integral theorem

30. Cauchy’s integral formula

31. Taylor series

32. Laurent series

33. Residue theorem

34. Solution integrals**Probability and Statistics**

35. Sampling theorems

36. Conditional probability

37. Mean

38. Median

39. Mode

40. Standard Deviation

41. Random variables

42. Discrete and Continuous distributions

43. Poisson distribution

44. Normal distribution

45. Binomial distribution

46. Correlation analysis

47. Regression analysis**Transform Theory**

48. Solutions of nonlinear algebraic equations

49. Single and Multi-step methods for differential equations**Numerical Methods**

50. Fourier Transform

51. Laplace Transform

52. z-Transform

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- 1. English grammar sentence completion

2. verbal analogies

3. word groups instructions

4. critical reasoning and verbal deduction

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- 1. Numerical computation

2. Numerical estimation

3. Numericalreasoning and data interpretation

- No Of Questions : 65 Total Marks : 100 Time limit : 180 Min
**Topics Covered**- All Subjects & All Topics

- No Of Questions : 65 Total Marks : 100 Time limit : 180 Min
**Topics Covered**- All Subjects & All Topics

- No Of Questions : 65 Total Marks : 100 Time limit : 180 Min
**Topics Covered**- All Subjects & All Topics

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Free body diagrams and equilibrium

2. Trusses and frames

3. virtual work

4. kinematics and dynamics of particles and of rigid bodies in plane motion

5. impulse and momentum (linear and angular) and energy formulations

6. collisions.

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Simple stresses

2. Thermal stresses

3. Complex stresses and strains

4. SFD &BMD

5. Deflections &slopes

6. strain gauges & rosettes

7. testing of hardness and impact strength

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Theory of simple bending

2. Centroids

3. moment of Inertia

4. Shear stress distribution in beams &Torsion

5. Thin cylinder & strain energy

6. Columns & struts

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Properties of Fluids

2. fluid statistics (Manometry,buoyancy, forces on submerged bodies)

3. fluid kinematics (control volume analysis of mass & fluid acceleration)

4. fluid dynamics (control volume analysis of momentum & energy ,differential equations of continuity and momentum, Bernoulli’s equation)

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Laminar flow

2. Turbulent flow & Boundary layer flow through pipes

3. head losses in pipes,bends etc

4. Hydraulic machines (Turbo-machinery, peltonwheel,francis and kaplan turbines impulse and reaction principles, velocity diagrams)

5. dimensional analysis

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Basic concepts

2 Zeroth law

3. Work & heat

4. First law of thermodynamics

5. Second law of thermodynamics and Entropy Availability

6. properties of pure substances

7. vapour and gas power cycles

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Air and ags compressors

2. I.C engines

3. Air standard Otto diesel and dual cycles

4. Refrigeration and air-conditioning

5. Vapour and gas refrigeration

6. Concepts of refrigeration and reheat and heat pump cycles

7. properties of moist air

8. Psychometric chart

9. Basic psychometric processes

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Design for static loading failure theories & variable loading riveted

2. bolted & welded joints

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Shafts

2. sliding and rolling contact bearings

3. clutches and brakes

4. gears & springs

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Conduction

2. Fins & convection

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Unsteady heat conduction

2. radiation & heat exchangers

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Analysis of planar mechanisms

2. Dynamic analysis of slider – crank mechanism

3. fly wheels

4. vibrations

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Gears & gear trains

2. cams

3. governors

4. balancing of reciprocating and rotating masses

5. Gyroscope

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Metal casting

2. welding metal forming & sheet

3. metal operations

4. Metal cutting, machining

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Metrology and inspection CNC M/C

2. NTM CIM & engineering materials

3. Jigs & Fixtures

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Inventory control

2. production planning

3. Control scheduling & sequencing

4. Line balancing

5. Forecasting materials requirement planning

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. PERT & CPM

2. Linear programming

3. Simplex transportation & assignment

4. Simple queuing models

5. Network flow models

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered****Linear Algebra**

1. Matrix Algebra

2. Systems of linear equations

3. Eigenvalues

4. Eigenvectors**Calculus**

5. Mean value theorems

6. Theorems of integral

7. calculus

8. Evaluation of definite and improper integrals

9. Partial Derivatives

10. Maxima and minima

11. Multiple integrals

12. Fourier series

13. Vector identities

14. Directional derivatives

15. Line integral

16. Surface integral

17. Volume integral

18. Stokes’s theorem

19. Gauss’s theorem

20. Green’s theorem**Differential equations**

21. First order equations (linear and nonlinear)

22. Higher order linear differential equations with constant coefficients

23. Method of variation of parameters

24. Cauchy’s equation

25. Euler’s equation

26. Initial and boundary value problems

27. Partial DifferentialEquations

28. Method of separation of variables.

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered****Complex variables**

1. Analytic functions

2. Cauchy’s integral theorem

3. Cauchy’s integral formula

4. Taylor series

5. Laurent series

6. Residue theorem

7. Solution integrals**Probability and Statistics**

8. Sampling theorems

9. Conditional probability

10. Mean

11. Median

12. Mode

13. Standard Deviation

14. Random variables

15. Discrete and Continuous distributions

16. Poisson distribution

17. Normal distribution

18. Binomial distribution

19. Correlation analysis

20. Regression analysis**Transform Theory**

21. Fourier Transform

22. Laplace Transform

23 z-Transform**Numerical Methods**

24.Solutions of nonlinear algebraic equations

25.Single and Multi?step methods for differential equations

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. English grammar sentence completion

2. verbal analogies

3. word groups instructions

4. critical reasoning and verbal deduction

- No Of Questions : 15 Total Marks : 25 Time limit : 45 Min
**Topics Covered**- 1. Numerical computation

2. Numerical estimation

3. Numericalreasoning and data interpretation

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- All topics are covered from the GATE Subjects
**Engineering Mechanics**and**Strength of materials**

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- All topics are covered from the GATE Subjects
**Production Engineering**and**Im and OR**

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- All topics are covered from the GATE Subjects
**Thermo Dynamics**

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- All topics are covered from the GATE Subjects
**Machine Design**and**Theory of Machines and Vibrations**

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- All topics are covered from the GATE Subjects
**Heat Transfer**and**Fluid Mechanics**

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- All topics are covered from the GATE Subjects
**General Aptitude**

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- All topics are covered from the GATE Subjects
**Engineering Mathematics**

- No Of Questions : 65 Total Marks : 100 Time limit : 180 Min
**Topics Covered**- All Subjects & All Topics

- No Of Questions : 65 Total Marks : 100 Time limit : 180 Min
**Topics Covered**- All Subjects & All Topics

- No Of Questions : 65 Total Marks : 100 Time limit : 180 Min
**Topics Covered**- All Subjects & All Topics

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- All topics are covered from the GATE Subjects
**Heat Transfer**and**Fluid Mechanics**

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- All topics are covered from the GATE Subjects
**Machine Design**and**Theory of Machines and Vibrations**

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- All topics are covered from the GATE Subjects
**Production Engineering**and**Im and OR**

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- All topics are covered from the GATE Subjects
**Engineering Mechanics**and**Strength of materials**

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- All topics are covered from the GATE Subjects
**Thermo Dynamics**

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- All topics are covered from the GATE Subjects
**Engineering Mathematics**

- No Of Questions : 30 Total Marks : 50 Time limit : 90 Min
**Topics Covered**- All topics are covered from the GATE Subjects
**General Aptitude**

- No Of Questions : 65 Total Marks : 100 Time limit : 180 Min
**Topics Covered**- GATE Model Test that covers all Mechanical subjects

- No Of Questions : 65 Total Marks : 100 Time limit : 180 Min
**Topics Covered**- GATE Model Test that covers all Mechanical subjects

- No Of Questions : 65 Total Marks : 100 Time limit : 180 Min
**Topics Covered**- GATE Model Test that covers all Mechanical subjects

- No Of Questions : 65 Total Marks : 100 Time limit : 180 Min
**Topics Covered**- GATE Model Test that covers all Mechanical subjects

- No Of Questions : 65 Total Marks : 100 Time limit : 180 Min
**Topics Covered**- GATE Model Test that covers all Mechanical subjects

- No Of Questions : 65 Total Marks : 100 Time limit : 180 Min
**Topics Covered**- GATE Model Test that covers all Mechanical subjects

# Let's see what our ex-students have to say -

__What is the best test series for GATE Mechanical?__

__What is the best test series for GATE Mechanical?__

GATE is well demanded certainly and the GATE score is a critically deciding factor in a competitive scenario like this. Being aware that time is limited and the skill to know the right concepts with analytical clarity in given time frame surely acts as the core competence for an aspirant. * GATE 2020 Online Test Series : Mechanical Engineering* based on

*is a set of thoroughly researched and meticulously curated extensive online*

**GATE exam pattern for Mechanical Engineering****best test series for GATE Mechanica**l with over vast repository of 100000 questions across main Engineering streams including Free online Mechanical Engineering objectiv test too. The onset of automation in the picture, the demand for Mechanical Engineers for private as well as public sector job opportunities is at rise to increasingly supervise, design, monitor and analyze these systems. Significant sectors like railways, national highways, heavy-engineering industries, ports, defense etc are some of the leading employers for Mechanical Engineers.

The test series avidly following * GATE exam pattern for Mechanical Engineering 2020* comprises of 80+ Tests with Video Solutions, 43 Chapter & Topic wise Tests, 25 Subject & Multi Subject wise Tests and 12 Full Mock Tests adopting uniquely stimulating 3Vs Concept-Hint-Solution aspect to crack GATE efficiently. With an interface exactly resembling the real GATE known as GATE Simulator, the reports generated by the

*provides a comprehensive analysis and 360 degree perspective of your scores comprising of strengths, weaknesses as well as your ranking in comparison to other top aspirants. The*

**GATE Online Test Series Mechanical Engineering 2020***on*

**GATE 2020 online test series for ME***is by far the leading, first-rate course available which is created on the basis of need for a concise, applicable and time-efficient module in an stimulating manner for the students to ace GATE as top ranker.*

**GATE MECHANICAL ENGINEERING Exam Pattern and Details**# About Tutor

VANI Institute was established in the year 1991 at Hyderabad spreading its wings to all branches of engineering and to the cities of Bangalore, Pune, Chennai, Kochi, Kolkata and Bhubaneswar.

VANI Institute initially started coaching for AMIE gaining a good reputation it then started coaching for GATE, establishing itself as the best coaching institute for GATE, ESE and PSUs in the country.

#### First GATE Institute in India

VANI Institute is the first Institute in India to start GATE coaching. The Institute started coaching for GATE in all branches. Over the years time and again the students across the country have endorsed for VANI as the best coaching Institute for GATE, ESE and PSUs.

VANI Institute aims to provide the top class and quality training to the students by providing with all the facilities and study material which can lead them as toppers in GATE, ESE and PSU exams. It is also well known for effective teaching and personality development skills.

#### Award Winner of Best Coaching Institute for GATE ESE and PSUs

Quality always pays off. VANI Institute has proven this emphatically. IndiaEducation.com run by Blindwink Solutions Private Limited have awarded VANI Institute with Best Coaching Institute GATE,ESE & PSUs. Apart from this award VANI Institute has won 7 other awards in the past